06.PHD
Permanent URI for this community
Browse
Browsing 06.PHD by Title
Now showing 1 - 20 of 575
Results Per Page
Sort Options
Item (1990-1980)استدعاء الشخصيات التراثية في الخطاب الشعري الجزائري المعاصر(Universty of Batna جامعة الحاج الأخضر, 2014) شبرو, عبد الكريمItem Advanced Nanocomposite Hydrogels for Photocatalysis and Antibacterial Activity Applications: Synthesis, Characterization, and Performance Evaluation(Universty of El-oued جامعة الوادي, 2024-02-22) Boutalbi, AbdelhakimNanocomposite hydrogels (NCHs) are a combination of two components nanofiller and hydrogel, this combination results in an advanced class of material known for its unique properties, making it suitable for various applications. Among them, are catalysis and biomedical. Herein, the preparation of nanocomposite hydrogels (NCHs) via the in-situ reduction approach was investigated. Potassium polyacrylate hydrogel (PPAH) was utilized to load silver (Ag) and Zinc oxide (ZnO) nanoparticles. The as-prepared samples PPAH/Agx and PPAH/Ag@ZnO NCHs were thoroughly characterized by different analytical techniques including UV-Vis, FTIR, XRD, SEM, and EDX. The indirect band gap energies were estimated to be 2.5 and 1.75 eV for PPAH/Ag and PPAH/Ag@ZnO, respectively, SEM images showed cubic shape for Ag NPs, The EDX quantitative analysis revealed that PPAH/Ag contains 60.48% of silver while PPAH/Ag@ZnO contains 58.77, 28.05, and 13.18% of Silver, Zinc, and Oxygen elements. during this work, the photocatalytic activity of the as-prepared NCHs was studied under sunlight irradiation, the outcomes presented 95% elimination of Rose Bengal dye over PPAH/Ag. Also, 98.77, and 98.05% elimination of o-Toluidine blue and 4-Bromophenol dyes, respectively, over PPAH/Ag@ZnO. Besides, PPAH/Ag@ZnO was subjected to a reusability test over 5 consecutive cycles in the degradation of o-Toluidine blue and 4-bromophenol dyes, the findings demonstrated its exceptional effectiveness and stability, Finally, PPAH/Agx samples exhibited better antibacterial effect against different types of microorganisms, namely Pseudomonas aeruginosa ATCC 27853, Escherichia coli ATCC 25922, and Staphylococcus aureus ATCC 25923 compared to most antibiotics used in this test. Overall, based on these results, these materials have promising potential for successful applications in catalysis and biomedical fields. الهلاميات المائية النانوية (NCHs) هي عبارة عن دمج عنصر نانوني في بنية هيدروجيل، ينتج عن هذا الدمج فئة متقدمة من المواد ذات خصائص فريدة من نوعها، مما يجعلها مناسبة لمختلف التطبيقات. والتي من بينها، الحفز والطب الحيوي. في هذه الدراسة، تم تحضير الهلاميات المائية النانوية (NCHs) عن طريق عملية "الإرجاع في الموقع". حيث استُخدم هيدروجيل متعدد أكريلات البوتاسيوم (PPAH) لتحميل جزيئات الفضة وأكسيد الزنك النانوية. تم تحليل العينات المحضرة PPAH/Agx وPPAH/Ag@ZnO NCHs بدقة من خلال تقنيات تحليلية مختلفة بما في ذلك UV-Vis وFTIR وXRD وSEM وEDX. وقد قدرت طاقات فجوة النطاق غير المباشرة بـ 2.5 و1.75 ev لـ PPAH /Ag وPPAH/Ag@ZnO، على التوالي، أظهرت صور المسح المجهري الإلكتروني SEM شكلًا مكعبًا لـجزيئات الفضة الناونية Ag NPs ، كما كشف التحليل الكمي EDX أن عينة PPAH/Ag تحتوي على 60.48% من عنصر الفضة بينما تحتوي عينة PPAH/Ag@ZnO على 58.77. 28.05، و13.18% من عناصر الفضة والزنك والأكسجين على التوالي. خلال هذا العمل، تم أيضا دراسة نشاط التحفيز الضوئي لـ NCHs المحضرة تحت إشعاع ضوء الشمس، وأظهرت النتائج إزالة 95٪ من صبغة البنغال الوردية على PPAH/Ag وإزالة 98.77، و98.05٪من الصبغين أورتو أزرق التولويدين و4-بروموفينول، على التوالي، باستعمال PPAH/Ag@ZnO. علاوة على ذلك، تم إخضاع PPAH/Ag@ZnO لاختبار قابلية إعادة الاستخدام على مدار 5 دورات متتالية في تحلل الصبغين أورتو أزرق التولويدين و4-بروموفينول، وأظهرت النتائج فعاليته واستقراره الاستثنائيين، وأخيرًا، أظهر إختبار مضادات البيكتريا فاعلية قوية لعينات PPAH/Agx ضد مختلف أنواع السلالات البيكتيريا وهي Pseudomonas aeruginosa ATCC 27853، Escherichia coli ATCC 25922، و Staphylococcus aureus ATCC 25923. حسب النتائج المتحصل عليها من هذا الإختبار، قد لُوحظ أن كبح عينات PPAH/Agx للبيكتيريا أكثر فعالية مقارنة بغالبية المضادات الحيوية المختلفة التي أعتمدت في هذا الإختبار. بشكل عام، بناءً على كل النتائج، تتمتع هذه المواد المحضرة بإمكانيات واعدة لتطبيقها بنجاح في مجال الحفز الكيميائي ومجال الطب الحيوي.Item Amélioration d’un distillateur solaire plan à effet de serre dans la région sud-est de l’Algérie(Universty of Eloued جامعة الشهيد حمة لخضرالوادي, 2020) Khechekhouche, AbderrahmaneAbstract The Oued region (southeast of Algeria) has great groundwater potential, but unfortunately it is often polluted. This water causes health problems in the bones, teeth and kidneys. Solar distillation seems an environmental, ecological and low-cost solution to transform this water into drinking water. Our experimental study sought to use simple techniques that can improve the productivity of conventional solar stills. According to the results, productivity is improved between 1.42 to 2.75 times. An economic study shows that this type of solar station reimburses the investment amount between 30 and 60 days.خلاصة تتمتع منطقة الواد (جنوب شرق الجزائر) بإمكانيات كبيرة للمياه الجوفية ، لكن للأسف غالبًا ما تكون ملوثة. يسبب هذا الماء مشاكل صحية في العظام والأسنان والكلى. يبدو التقطير الشمسي حلاً بيئيًا وبيئيًا ومنخفض التكلفة للتحول هذه المياه في مياه الشرب. سعت دراستنا التجريبية إلى استخدام تقنيات بسيطة يمكن أن تحسن إنتاجية اللقطات الشمسية التقليدية. وفقا للنتائج، تم تحسين الإنتاجية بين 1.42 إلى 2.75 مرة. تظهر دراسة اقتصادية أن هذا نوع محطة الطاقة الشمسية يعوض مبلغ الاستثمار ما بين 30 و 60 يوما.Item Analyse de systèmes aux dérivées partielles modélisant des phénomènes enmécanique des milieux continus(Universty of Eloued جامعة الشهيد حمة لخضرالوادي, 2023-07-08) CHOUIA, ABDALLAHThe aim of this thesis is to study two problems in contact mechanics, a quasistatic contact problem between a thermo-viscoelastic-viscoplastic body and a moving foundation, such that the contact is modeled by a normal compliance condition with a associated dry friction law and wear described by Archard's law. And a quasi-static problem describing the contact between an electro-viscoelastic body with a conductive foundation, the contact is unitary with adhesion and unilateral constraint, formulated using quasi-variational inequalities of evolution in terms of displacement and potential electric. We write the problem and make appropriate assumptions about the data. Next, we establish a variational formulation and an existence and uniqueness result of a weak solution for the problem. الهدف من هذه الأطروحة هو دراسة مسألتين في ميكانيك التلامس ، مسألة التلامس شبه الساكنة بين جسم بلاستيكي حراري لزج مطاطي وأساس متحرك ، بحيث يكون التلامس على غرار حالة الامتثال العادية مع قانون الاحتكاك الجاف والتآكل المرتبط به الموصوف في قانون آرتشارد. ومشكلة شبه ثابتة تصف التلامس بين جسم مرن كهربائي ولزج مع قاعدة موصلة ، يكون الاتصال أحادي الجانب مع الالتصاق والضغط أحادي الجانب ، وقد تمت صياغته باستخدام عدم المساواة شبه المتغيرة للتطور من حيث الإزاحة والجهد الكهربائي. نكتب المشكلة ونحدد الافتراضات المناسبة حول البيانات. بعد ذلك ، نؤسس صيغة متباينة ونتيجة وجود وتفرد لحل ضعيف للمشكلة.Item Analyse mathématique de quelques problèmes de contact entre deux corps déformables(University of Eloued جامعة الوادي, 2021-03-29) Rimi, khezzaniThis thesis is intended for the variational study of some contact problems with or without friction, adhesion, damage and wear between two deformable bodies. We analyze dynamic processes for thermo-electro-visco-elastic, electro-visco-plastic materials.The results obtained concern the existence and uniqueness of a solutionlow for the problems studied. The thesis is structured in four chapters. The first chapter is devoted to recalling the various mechanical models of contact studied. The second chapter is as well as to recall the few mathematical tools needed in the thesis. The third chapter is dedicated to the analysis of thermo-electro-viscoelastic problems with adhesion and damage. The fourth chapter is dedicated to the analysis of electro-visco-plastic problems with friction and wear. تهدف هذه الرسالة إلى الدراسة المتغيرة لبعض مشاكل التلامس مع أو بدون الاحتكاك اضافة الى الالتصاق والتلف والتآكل بين جسمين مشوهين. نقوم بتحليل العمليات الديناميكية للمواد اللزجة الحرارية والكهربائية اللزجة والمواد البلاستيكية الكهربية اللزجة. وتتعلق النتائج التي تم الحصول عليها بوجود ووحدانية الحل الضعيف للمشكلات التي تمت دراستها. تتكون الأطروحة من أربعة فصول. الفصل الأول مخصص لاستدعاء النماذج الميكانيكية المختلفة للتلامس التي تمت دراستها. الفصل الثاني لاًضيأوه لتذكير بالأدوات الرياضية اللازمة في الأطروحة. الفصل الثالث مخصص لتحليل مشاكل اللزوجة الحرارية والكهربائية مع الالتصاق والتلف. الفصل الرابع مخصص لتحليل مشاكل اللزوجة الكهربائية والبلاستيك مع الاحتكاك والتآكل.Item Analyse Mathématique d’un système aux dérivée partielles modélisant des problèmes de contact en phénomènes mécaniques(Universty of Eloued جامعة الشهيد حمة لخضرالوادي, 2023-01-07) Hamidat, AhmedRésumé :فرنسية أو انجليزية L'objectif de ce travail est l'étude de quelques problèmes de Mécanique du Contact pour les lois de comportement électro-viscoélastiques, électro- élasto-viscoplastiques avec endommagement interne du matériau et effet thermique avec ou sans adhérence. On obtient des formulations variationnelles suivies des résultats d'existence et d'unicité des solutions faibles. La preuve est basée sur des arguments d'inégalités variationnelles évolutives, d'inégalités paraboliques, d'équations différentielles et du théorème du point fixe. الملخص: الهدف من هذا العمل هو دراسة بعض المشاكل في ميكانيكا التلامس للقوانين التأسيسية اللزجة الكهربية ، والمرونة الكهربية اللزجة مع الضرر الداخلي للمادة والتأثير الحراري أثناء الالتصاق أو بدونه. نحصل على صيغ متغيرة متبوعة بنتائج وجود الحلول الضعيفة وتفردها. يعتمد الدليل على حجج عدم المساواة التطورية المتغيرة، وعدم المساواة المكافئ، والمعادلات التفاضلية، ونظرية النقطة الثابتة.Item Analyse Mathématiques de quelques problèmes de contact avec adhésion entre deux corps piézoélectriques(University of Eloued جامعة الوادي, 2021-01-21) Meziane, Said AmeurDans cette thèse, on à étudié deux problèmes. L'un est l'étude de problème en mécanique de contact avec frottement de coulomb et adhésion pour les lois constitutives électro-élasticité, l'autre nous avons présenté un modèle pour le processus quasi-statique de contact avec frottement, adhésion et endommagement entre deux corps thérmo électro-viscoélastiques. On a utilisé les formules de Green pour obtenir les formulations variationnelle des problèmes. Comme la frontière des corps donné des problèmes ont de bonne régularité. L'existence et l'unicité de la solution faible de premier problème Electro-mécanique à été établie. Dans le deuxième problème, le contact a été modélisé avec les conditions de compliance normale et la loi de Coulomb de friction sèche associée. La nouvelle caractéristique du modèle était la compliance normale et la loi de frottement dépend de l'adhérence telle que présentée dans les équations et l'inéquation. La difficulté de résoudre ces types de problèmes réside non seulement dans le couplage des aspects viscoélastiques, électriques et thermiques, mais aussi dans la non-linéarité des conditions aux limites modélisant ce type des phénomènes physiques. (Conditions de contact avec adhésion et de frottement), ce qui nous donne une inégalité quasi-variationnelles et type d'égalités variationnelles paraboliques non linéaires. L'existence de la solution unique et faible du problème a été établie. On a montré l'existence et l'unicité des solutions des problèmes précédents par l'utilisation des arguments suivants : Équations variationnelle dépendant du temps, équations variationnelle d'évolution, inéquations différentielles et le théorème de point fixe. درسنا في هذه الأطروحة مشكلتين. الأول هو دراسة المشكلة في ميكانيكا التلامس مع احتكاك الكولوم والالتصاق للقوانين التأسيسية للمرونة الكهربائية ، والآخر قدمنا نموذجًا لعملية شبه ثابتة للتلامس مع الاحتكاك والالتصاق والضرر بين اثنين من اللزوجة الكهربية الحرارية. جثث. استخدمنا معادلات جرين للحصول على الصياغات المتغيرة للمشكلات. نظرًا لأن حدود الأجساد تعطى مشاكل لها انتظام جيد. تم إثبات وجود وتميز الحل الضعيف للمشكلة الكهروميكانيكية الأولى. في المشكلة الثانية ، تم تصميم جهة الاتصال وفقًا لشروط الامتثال العادي وقانون الاحتكاك الجاف المصاحب لـ Coulomb. كانت السمة الجديدة للنموذج هي الامتثال العادي ويعتمد قانون الاحتكاك على الالتصاق كما هو موضح في المعادلات وعدم المساواة. لا تكمن صعوبة حل هذه الأنواع من المشكلات في اقتران الجوانب المرنة اللزجة والكهربائية والحرارية فحسب ، بل تكمن أيضًا في عدم خطية الظروف الحدودية التي تمثل هذا النوع من الظواهر الفيزيائية. (شروط التلامس مع الالتصاق والاحتكاك) ، مما يعطينا عدم مساواة شبه متغيرة ونوع من المساواة المتغيرة غير الخطية المكافئة. تم إثبات وجود الحل الفريد والضعيف للمشكلة. لقد أظهرنا وجود وتفرد حلول المشكلات السابقة باستخدام الحجج التالية: المعادلات المتغيرةItem Analyse variationelle et numerique de quelque problemes de contact entre des corps(Universty of Eloued جامعة الشهيد حمة لخضرالوادي, 2023-01-07) Ferhat, Mohammed saidRésumé : انجلزية The object of this thesis is the modeling, the variational and numerical study of some contact problems with or without friction, between a deformable body and a foundation, or between two deformable bodies. Here we consider nonlinear laws of behavior for elastic-viscoplastic, electro-viscoelastic, and viscoelastic piezoelectric materials with long memory. For these problems we obtain variational formulations followed by existence and uniqueness results of weak solutions. The techniques employed are based on the theory of monotone operators followed by a version of the Cauchy-Lipschitz theorem and Banach's fixed point arguments. Finally, we propose a numerical approximation of the purely mechanical problem using discrete schemes. For these schemes, we obtain error estimation results. الملخص: الهدف من هذه الأطروحة هو النمذجة، والدراسة المتغيرة والرقمية لبعض مشاكل الاتصال مع أو بدون احتكاك، بين جسم مشوه وأساس، أو بين جسمين مشوهين. هنا نأخذ في الاعتبار قوانين السلوك غير الخطية للمواد البلاستيكية المرنة اللزوجة، والمطاطية الكهربية اللزجة، والمواد الكهروضغطية اللزجة المطاطية ذات الذاكرة الطويلة. لهذه المشاكل نحصل على صيغ متغيرة تليها نتائج الوجود والتفرد للحلول الضعيفة. تعتمد التقنيات المستخدمة على نظرية المؤثرات الرتيبة متبوعة بنسخة من نظرية كوشي ليبشيتز وحجج النقطة الثابتة لباناخ. أخيرًا، نقترح تقريبًا عدديًا للمشكلة الميكانيكية البحتة باستخدام مخططات منفصلة ونحصل على نتائج تقدير الخطأ.Item Analysis of the Voltage Dip withstand of a Wind Turbine System connected to the Grid by Advanced Techniques(2024-02-29) Arif AbdelhalimIn the context of seeking new and alternative energy sources, wind energy is of significant importance due to its renewable and clean nature. However, the wind turbines based on DFIG are highly sensitive to grid disturbances, which negatively affect both the DFIG and its associated electronic control circuits. Therefore, this thesis presents an analysis based on voltage dips for a grid-connected wind turbine system. Initially, we studied the mathematical models of DFIG and its vector control using PI controller, and the wind turbine with its control using MPPT. Research has indicated that while PI controller is effective for linear systems with a consistent nature, it lacks robustness and efficiency in nonlinear systems characterized by variability and disturbances. To address this challenge, the Backstepping control approach has been suggested. This approach is particularly suitable for nonlinear systems due to its recursive structure. It employs a virtual control element based on the Lyapunov function to streamline the complexities of nonlinear control problems. Afterwards, we examined fuzzy control, which provides an approximate solution for nonlinear systems and reduces the noise generated by the system, in addition to enhancing robustness and stability. Despite the advantages offered by BSC and FLC, a hybrid control technology called FBSC has been proposed to combine them. This technique synthesizes the strengths of both BSC and FLC, aimed at providing an approximate solution for complex and uncertain nonlinear systems using a virtual fuzzy control element, guided by the Lyapunov function to simplify fuzzy parameters. This technique was applied to enhance the control of DFIG's rotor. The enhancement lies in achieving lower ripples of stator active and reactive powers, reduced total harmonic distortion (THD) of the stator currents, and robustness against parameter variations. Subsequently, the DFIG was subjected to both symmetrical and asymmetrical voltage dips, which led to stator and rotor overcurrents. However, it has been shown that asymmetrical dips are more harmful than symmetrical dips due to the oscillations carried on the rotor currents, which correspond to a significant increase in THD, and high ripples of the stator active and reactive powers. To address this problem, a Dynamic Voltage Restorer (DVR) was proposed to restore the grid voltage, which provides results almost as good as before the dips occurred. In essence, the combination of optimized DFIG control and DVR provides a reliable and robust solution for maintaining energy quality and stability within power systems. الملخص: في إطار البحث عن مصادر جديدة وبديلة للطاقة الكهربائية، تحظى طاقة الرياح بأهمية كبيرة نظرا لطبيعتها المتجددة والنظيفة. ومع ذلك، فإن توربينات الرياح القائمة على DFIG تكون حساسة للغاية لاضطرابات الشبكة، مما يؤثر سلبًا على كل من DFIG ودوائر التحكم الإلكترونية المرتبطة به. لذلك، تقدم هذه الأطروحة تحليلاً يعتمد على انخفاضات الجهد لنظام وتوربينات الرياح المتصلة بالشبكة. في البداية قمنا بدراسة النماذج الرياضية لـ DFIG والتحكم في ناقلاتها باستخدام جهاز التحكم PI، وتوربينات الرياح مع التحكم بها باستخدام.MPPT أشارت نتائج الأبحاث إلى أنه على الرغم من فعالية وحدة التحكم PI في الأنظمة الخطية ذات الطبيعة المتسقة، إلا أنها تفتقر إلى المتانة والكفاءة في الأنظمة غير الخطية التي تتميز بالتقلب والاضطرابات. ولمواجهة هذا التحدي، تم اقتراح نهج التحكم الخلفي. هذا النهج مناسب بشكل خاص للأنظمة غير الخطية بسبب بنيته العودية. يستخدم عنصر تحكم افتراضي يعتمد على دالة Lyapunov لتبسيط تعقيدات مشاكل التحكم غير الخطية. بعد ذلك قمنا بدراسة التحكم الضبابي والذي يوفر حل تقريبي للأنظمة غير الخطية ويقلل من الضوضاء الناتجة عن النظام بالإضافة إلى تعزيز المتانة والاستقرار. على الرغم من المزايا التي تقدمها BSC وFLC، فقد تم اقتراح تقنية تحكم هجينة تسمى FBSC للجمع بينهما. تقوم هذه التقنية بتجميع نقاط القوة لكل من BSC وFLC، بهدف توفير حل تقريبي للأنظمة غير الخطية المعقدة وغير المؤكدة باستخدام عنصر تحكم غامض افتراضي، مسترشدًا بدالة Lyapunov لتبسيط المعلمات الغامضة. تم تطبيق هذه التقنية لتعزيز التحكم في دوار ;DFIG يكمن التعزيز في تحقيق تموجات أقل للقوى النشطة والتفاعلية للجزء الثابت، وتقليل التشوه التوافقي الكلي (THD) لتيارات الجزء الثابت، والمتانة ضد اختلافات المعلمات. بعد ذلك، تعرض DFIG لانخفاضات الجهد المتماثلة وغير المتماثلة للشبكة الكهربائية، مما أدى إلى تيارات زائدة للجزء الثابت والدوار. ومع ذلك، فقد ثبت أن الانخفاضات غير المتماثلة أكثر ضررًا من الانخفاضات المتماثلة، وذلك بسبب التذبذبات المحمولة على تيارات الجزء الدوار، والتي تتوافق مع زيادة كبيرة في THD، والتموجات العالية للقوى النشطة والتفاعلية للجزء الثابت. ولمعالجة هذه المشكلة، تم اقتراح أداة استعادة الجهد الديناميكي (DVR) لاستعادة جهد الشبكة، مما توفر نتائج جيدة تقريبًا كما كانت قبل حدوث الانخفاضات. في جوهر الأمر، يوفر الجمع بين التحكم الأمثل في DFIG وDVR حلاً موثوقًا وقويًا للحفاظ على جودة الطاقة واستقرارها داخل أنظمة الطاقة.Item Asymptotic behavior of some problems of porous thermoelastic and non-simple materials thermo´elastiques des mat´eriaux poreux et non-simples(Universty of Eloued جامعة الشهيد حمة لخضرالوادي, 2023-12-24) Ahmima, AfafIn this thesis, we are concerned with the long time behavior of some systems in porous and non-simple thermoelasticity. For porous systems, we studied three problems. The first problem involves a delay term, for which we proved exponential decay under appropriate assumptions on the coefficients of the dissipation and the delay. The second problem is concerned with a porous system with the Gurtin-Pipkin law. The third system is a porous system with microtemperature. We proved exponential stability for both systems. The fourth, fifth, and sixth problems are concerned with non-simple systems with and without porosity, as well as the presence of thermal effects of second sound type. We proved various stability results. For the well-posedness, we used a semigroup approach and the Hille-Yosida and Lax-Milgram theorems. Additionally, for stability, we employed the multiplier method, Lyapunov functionals, and the Gearhart-Prüs theorem. الملخص: في هذه الرسالة قمنا بدراسة السلوك التقاربي عند الزمن اللانهائي لبعض المسائل الخاصة بالأوساط المسامية والمواد غير البسيطة. بالنسبة للاوساط المسامية درسنا ثلاث مسائل: الاولى تتعلق بجملة مسامية حرارية لزجة مع معامل تأخير حيث اثبتنا الاستقرار الاسي للحل تحت شرط بين معاملي الاضمحلال والتأخير. في المسألة الثانية تعطى معادلة انتشار الحرارة وفق قانون Gurtin-Pipkin اما المسالة الثالثة فتحوي حرارة دقيقة وفي كلا المسألتين اثبتنا التقارب الاسي. المسائل الثلاث الأخيرة تتعلق بمواد غير بسيطة بوجود او غياب المسامية ووجود تاثير حراري ذو موجة ثانية حيث توصلنا الى نتائج مختلفة بالنسبة الى الاستقرار. لاثبات وجود ووحدانية الحلول استخدمنا نظرية انصاف الزمر ونظرية Hille-Yosida و Lax-MillgramItem Biosynthesis and characterization of nickel oxide nanoparticles using different plant extracts and study of their biological activities(Universty of Eloued جامعة الشهيد حمة لخضرالوادي, 2023-05-07) LOUAFI, OkbaIn recent years, nanoparticles synthesized by the green method have attracted the attention of many researchers due to their improved properties that are desirable in many fields. This study aims to biosynthesize nickel oxide nanoparticles and evaluate their antioxidant activities. Two plant extracts (Artemisia herba alba leaves and Punica granatum L peel) were utilized as reducing and stabilizing-agents for the green synthesis process. To control and improve the crystal size and antioxidant activity of NONPs, we focused on studying two parameters: plant extract and nickel nitrate concentration. Several characterization techniques such as UV/Vis, X-ray diffraction, FT-IR, SEM, and EDX were used to validate the formation of NONPs and study their structural and morphological properties. Results verified the successful biosynthesis of nickel oxide nanoparticles. UV/Vis absorption spectrum showed a maximal absorption at 300 nm which is related to NiO. The FTIR spectrum exhibited common peaks between 400 and 1000 cm-1, which corresponds to the Ni-O stretching vibration mode. In addition, the XRD patterns confirmed that NONPs are of high purity and crystallinity, with a nanoscale-size ranging from 7.49 to 14.51 nm. The images obtained by a scanning electron microscope (SEM) indicated that some of the obtained nanoparticles have a spherical shape, while others have an irregular shape. Additionally, the antioxidant activity of NONPs samples was evaluated using three different techniques, which showed significant antioxidant activity in all the performed tests. في السنوات الأخيرة، جذبت الجسيمات النانوية المُصنّعة بالطريقة الخضراء انتباه العديد من الباحثين نظرًا لخصائصها المحسّنة المرغوبة في العديد من المجالات. يهدف هذا العمل إلى التخليق الحيوي لجسيمات أكسيد النيكل النانوية ودراسة أنشطتها المضادة للأكسدة. تم استخدام مستخلصين نباتيين (أوراق الشيح الأبيض وقشور فاكهة الرمان) كعوامل اختزال وتثبيت لعملية التوليف الأخضر. للتحكم في حجم البلورات والنشاط المضاد للأكسدة وتحسينهما، ركزنا على دراسة متغيرين: المستخلص النباتي وتركيز نترات النيكل. تم استخدام العديد من تقنيات التوصيف مثل الأشعة فوق البنفسجية ((UV-Vis، الاشعة تحت الحمراء ((FTIR، انعراج الاشعة السينية (XRD)، المجهر الالكتروني الماسح (SEM) والاشعة السينية المشتتة للطاقة (EDX) للتحقق من صحة تكوين الجسيمات النانوية ودراسة خصائصها الهيكلية والمورفولوجية. أثبتت النتائج نجاح التخليق الحيوي لجسيمات أكسيد النيكل النانوية. أظهر طيف امتصاص UV / Vis أقصى امتصاص عند 300 نانومتر وهو مرتبط بـ اكسيد النيكل. أظهر طيف FTIR قممًا مشتركة بين 400 و1000 سم -1، وهو ما يتوافق مع وضع اهتزاز تمدد أكسيد النيكل. بالإضافة إلى ذلك، أكدت أنماط XRD أن جسيمات أكسيد النيكل النانوية عالية النقاء والتبلور، بحجم نانوي يتراوح من 7.49 إلى 14.51 نانومتر. أشارت الصور التي تم الحصول عليها بواسطة المجهر الإلكتروني الماسح (SEM) إلى أن بعض الجسيمات النانوية التي تم الحصول عليها لها شكل كروي، في حين أن البعض الآخر لها شكل غير منتظم. بالإضافة إلى ذلك، تم تقييم النشاط المضاد للأكسدة لعينات أكسيد النيكل النانوية باستخدام ثلاث تقنيات مختلفة، والتي أظهرت نشاطًا كبيرًا مضادًا للأكسدة في جميع الاختبارات التي تم إجراؤها.Item Boundary control and asymptotic stability of an axially moving string(Universty of Eloued جامعة الشهيد حمة لخضرالوادي, 2023-01-25) TIKIALINE, Belgacemالملخص: في هذه الأطروحة ، نحن مهتمون بدراسة استقرار حركة محورية مثل الخيوط والأحزمة والأسلاك والكابلات والأشرطة المغناطيسية والسلاسل , يتعلق العمل الأول بسلسلة متحركة محوريًا تخضع لاضطراب الحدود غير المحدود. يتم استخدام طريقة ليبونوف لإظهار فعالية التحكم في الحدود لضمان تقليل الاهتزاز. النتائج التي تم الحصول عليها تحسن بعض النتائج السابقة , المشكلة الثانية هي تحريك شعاع اللزوجة المطاطية محوريًا. لإظهار استقرار هذا النظام ، نستخدم تقنية المضاعفات. Résumé : فرنسية أو انجلزية In this thesis, we are interested in studying the stabilization of an axially moving ,like threads, belts, wires, cables, magnetic tapes,and chains .The first work is concerned with an axially moving string subject to unbounded boundary disturbance.The Lyapunov method is employed to show the efctiveness of the boundary control for ensuring the vibration reduction. The obtained results improves certain previous results. The second problem is axially moving viscoelastic beam . To show the stabilization of these system , we use a multipliers technique.Item Cheminée solaire : applications et perspectives dans le Sud Algérien(Universty of Eloued جامعة الشهيد حمة لخضرالوادي, 2021) MOKRANI, Omar Ben ElkhettabAbstract In modern society, energy consumption is increasing tremendously year by year, due to the growth of the world's population, their demand for comfortable means, and the development of the mondial economy. Unfortunately, conventional sources of energy have problems, namely availability and pollution. Therefore, we must develop and use renewable energy resources, especially our enormous natural resource, the sun. Since solar energy is unlimited in human scale, the direct conversion of solar energy into electrical energy using solar chimney power plants (SCPP) is seen as a good idea to solve the increasing demand for energy supply. A small-scale prototype of (SCPP) with 8 m height and 12 m of collector diameter is built in the campus Zone of Ouargla University at the laboratory of the Process Engineering (LGP) which is located in southern Algeria where solar irradiation rate is high. The main objective of this study is to achieve the highest air velocity within the chimney in the day and in the night in order to use this air to move an electric turbine. Through an experimental study, the influence of climatic conditions (solar radiation and ambient temperature) and geometric parameters on the production efficiency of the solar chimney was determined. In addition, the influence of the hybridization system on the performance of the solar chimney and on the duration of its operation after sunset was studied with the use of geothermal energy called ALBIEN. The last was used to maintain the temperature level of the collector overnight.خلاصة في المجتمع الحديث ، يزداد استهلاك الطاقة بشكل كبير عامًا بعد عام ، بسبب نمو سكان العالم ، ومطالبتهم بالوسائل المريحة ، والتنمية للاقتصاد مونديال. للأسف مصادر الطاقة التقليدية لديها مشاكل ، وهي التوافر والتلوث. لذلك ، يجب علينا تطوير واستخدام الطاقة المتجددة الموارد ، وخاصة مواردنا الطبيعية الهائلة ، الشمس. لأن الطاقة الشمسية غير محدودة في النطاق البشري ، التحويل المباشر للطاقة الشمسية إلى طاقة كهربائية باستخدام الطاقة الشمسية تعتبر محطات توليد الطاقة من المداخن (SCPP) فكرة جيدة لحل الطلب المتزايد على امدادات الطاقة. تم بناء نموذج أولي صغير الحجم (SCPP) بارتفاع 8 أمتار وقطر مجمّع 12 مترًا منطقة الحرم الجامعي لجامعة ورقلة في مختبر هندسة العمليات (LGP) التي تقع في جنوب الجزائر حيث معدل الإشعاع الشمسي مرتفع. الهدف الرئيسي من هذه الدراسة هو تحقيق أعلى سرعة هوائية داخل المدخنة في ليلا ونهارا لاستخدام هذا الهواء لتحريك التوربينات الكهربائية. من خلال دراسة تجريبية تأثير الظروف المناخية (الاشعاع الشمسي و المحيط كانت درجة الحرارة) والمعلمات الهندسية على كفاءة إنتاج المدخنة الشمسية عازم. بالإضافة إلى ذلك ، فإن تأثير نظام التهجين على أداء تم دراسة المدخنة الشمسية وعلى مدة تشغيلها بعد غروب الشمس باستخدام تسمى الطاقة الحرارية الأرضية ALBIEN. تم استخدام الأخير للحفاظ على مستوى درجة حرارة جامع بين عشية وضحاها.Item Codage embÔité des images 2D/3D dans le domaine Transformé(University of Annaba جامعة عنابة, 2010) Samai, DjamelL'étude menée dans cette thèse s'inscrit dans le contexte général de la compression d'images numériques fixes et animées, plus précisément dans un contexte d'étude d'algorithmes de compression scalables ou progressifs. On cherche à obtenir. par un unique processus d'encodage, un flux binaire décodable à de multiples niveaux de qualité. En plus, vu les nouveaux besoins des applications émergentes de communication, nous avons étudié d'autres fonctionnalités récentes telles que le codage à contexte adaptable et le codage à région d'intérêt (ROI). Dans ce cadre, nous avons proposé l'étude de différentes architectures de schémas de codage par la transformée en ondelettes discrète (DWT) et la transformée en cosinus discrète (DCT). Nous avons présenté leurs avantages et leurs limitations, ainsi que des résultats comparatifs. Cette étude s'est élargie vers les séquences d'images. Notre objectif est atteint, nous avons obtenu de bons résultats, de point de vue taux de bits ou de point de vue qualité visuelle des images reconstruites. Ainsi l'insertion de quelques fonctionnalités récentes nous a permis d'avoir un codeur similaire aux codeurs actuels tels que le codeur JPEG 2000. الدراسة الموجودة في هذه الرسالة تدخل في الإطار العام لضغط الص الثابتة والمتحركة، وبعبارة أدق في إطار دراسة خوارزميات الضغط عمارة التدرجية، حيث نسعي لاستنتاج عدة نوعيات للصور المضغوطة من طرف للضغط زيادة على الاحتياجات الجديدة التي ظهرت مع تطبيقات الاتصالات، قدر بدراسة مميزات جديدة في هذا المجال مثل ضغط أشياء محددة في الصورة، ضد أكثر من أشياء أخرى (ROI). في هذا الإطار اقترحنا دراسة عدة أشكال من خوارزميات ضغط الصور باستعمال التحويلات الموجية المتقطعة (DWT) و التحويلات الى المتقطعة (DCT). استعرضنا إيجابياتها وسلبياتها مع دراسة مقارنة للنتائج هذه الدراسة توسعت إلى الصور المتحركة. بلغنا الهدف المسطر من قبل، حيث تحصلنا على نتائج إيجابية من حيث نسبة الضغط أو نوعية الصور المتحصل عليها. كذلك إضافة بعض الخصائص الحديثة في ضغط الصور سمحت لنا بإيجاد ضاغط للصور مشابه للضواغط الحديثة مثل الضاغط 2000 JPEG.Item Commande par Réseaux de Neurones Artificiels d’un Filtre Actif Parallèle Triphasé(Universty of Eloued جامعة الشهيد حمه لخضر, 2022-06-28) Ben Amar, Asmaالملخص: تقدم هذه الأطروحة إحدى تقنيات الشبكات العصبية. تمكن هذه التقنية من تحديد الاضطرابات في الشبكة الكهربائية وتستعمل في مصفاة نشطة متوازية لتصفية توافقيات التيار و بالتالي تحسين جودة الطاقة الكهربائية. تتمتع هذه النوعية من الشبكات العصبية ببنية بسيطة وسهلة التشكيل. نقوم بتحديد التيارات التوافقية بطريقة الإستطاعة اللحظية الحقيقية التخيلية (PIRI) وبواسطة طريقة المعلم التزامني SRF)). في هاتين الطريقتين، قمنا بتطوير مرشحات الاستخراج التالية: مرشح متعدد المتغيرات (FMV)، مرشح تمرير منخفض عصبي و مرشح عصبي متعدد المتغيرات عصبي. تعمل المرشحات متعددة المتغيرات في المعلم αβ ، وتعمل مرشحات التمرير المنخفض في المعلمdq . تم اختبار مرشحات الإستخراج المذكورة سابقا عن طريق محاكاة الفلتر النشط المتوازي ذوثلاثة أسلاك وكذا الفلتر النشط المتوازي رباعي الأسلاك، حيث أظهرت نتائج المحاكاة التي تم الحصول عليها أن المرشحات التي تستخدم التقنية العصبية تعطي أداءً ممتازاً من ناحية تحديد التيارات التوافقية وتصفيتها. قمنا بدراسة الطريقة العصبية المباشرة من أجل تحديد التيارات التوافقية. تم اختبار هذه الأخيرة بواسطة المحاكاة ثم تطويرها تجريبيًا في مخبر إستغلال و تثمين الموارد الطاقوية الصحراوية LEVRES)). حيث أن نتائج المحاكاة المتحصل عليها كانت مرضية للغاية، ووضحت كفاءة النموذج المقترح للتحكم في تلوث شبكة الكهرباء. من أجل تنظيم جهد ناقل التوتر المستمر في المرشح النشط المتوازي، تم تطوير منظم خطوة إلى الوراء (Backstepping) و اختباره. أعطى هذا المنظم أداءً ديناميكيًا أفضل مقارنة بالمنظم النسبي التكاملي (PI)، فهو لا يسبب تجاوزات في المراحل العابرة. أما في الحالة المستقرة فإن أداء منظم خطوة إلى الوراء و المنظم النسبي التكاملي متماثلان. [2] Résumé : Dans cette thèse, nous présentons des réseaux de neurones de type Adaline pour le filtrage des courants harmoniques par un filtre actif parallèle. Ces réseaux de type Adaline possèdent une structure simple et facile à réaliser. L’identification de ces courants harmoniques sera réalisée par la méthode des puissances instantanée réelle et imaginaire et par la méthode du référentiel synchrone. Dans chacune de ces deux méthodes, nous avons développé les filtres d’extractions suivants : filtre multi-variable, filtre multi-variable neuronal et filtre passe-bas neuronal. Les filtres multi-variables opèrent dans le repère αβ et les filtres passe bas opèrent dans le repère dq. Ces différentes variantes des méthodes d’identifications sont testées par simulation dans le cas d’un filtre actif parallèle à trois fils et dans le cas d’un filtre actif parallèle à quatre fils. Les résultats des simulations obtenus montrent que les variantes neuronales d’identification donnent des performances excellentes. Afin d’identifier les courants harmoniques dans le repère des courants triphasés, nous avons présenté la méthode neuronale directe. Cette méthode est testée par simulation et élaborées expérimentalement sur un banc d'essai au laboratoire LEVRES. Les résultats obtenus ont été très satisfaisants et montrent l’efficacité du modèle proposé pour la dépollution du réseau électrique. Afin de réguler la tension du bus continu dans le filtre actif parallèle, la régulation par backstepping est développée puis testé. Le régulateur par backstepping a donné des meilleures performances dynamiques par rapport à celles du régulateur PI. Le régulateur par backstepping n’engendre pas de dépassements en régime transitoire. Par contre en régime permanent, il donne les mêmes performances que celles d’un régulateur PI.Item Commande par Réseaux de Neurones Artificiels d’un Filtre Actif Parallèle Triphasé(Universty of Eloued جامعة الشهيد حمة لخضرالوادي, 2023-06-28) Ben amar, Asmaالملخص: تقدم هذه الأطروحة إحدى تقنيات الشبكات العصبية. تمكن هذه التقنية من تحديد الاضطرابات في الشبكة الكهربائية وتستعمل في مصفاة نشطة متوازية لتصفية توافقيات التيار و بالتالي تحسين جودة الطاقة الكهربائية. تتمتع هذه النوعية من الشبكات العصبية ببنية بسيطة وسهلة التشكيل. نقوم بتحديد التيارات التوافقية بطريقة الإستطاعة اللحظية الحقيقية التخيلية (PIRI) وبواسطة طريقة المعلم التزامني SRF)). في هاتين الطريقتين، قمنا بتطوير مرشحات الاستخراج التالية: مرشح متعدد المتغيرات (FMV)، مرشح تمرير منخفض عصبي و مرشح عصبي متعدد المتغيرات عصبي. تعمل المرشحات متعددة المتغيرات في المعلم αβ ، وتعمل مرشحات التمرير المنخفض في المعلمdq . تم اختبار مرشحات الإستخراج المذكورة سابقا عن طريق محاكاة الفلتر النشط المتوازي ذوثلاثة أسلاك وكذا الفلتر النشط المتوازي رباعي الأسلاك، حيث أظهرت نتائج المحاكاة التي تم الحصول عليها أن المرشحات التي تستخدم التقنية العصبية تعطي أداءً ممتازاً من ناحية تحديد التيارات التوافقية وتصفيتها. قمنا بدراسة الطريقة العصبية المباشرة من أجل تحديد التيارات التوافقية. تم اختبار هذه الأخيرة بواسطة المحاكاة ثم تطويرها تجريبيًا في مخبر إستغلال و تثمين الموارد الطاقوية الصحراوية LEVRES)). حيث أن نتائج المحاكاة المتحصل عليها كانت مرضية للغاية، ووضحت كفاءة النموذج المقترح للتحكم في تلوث شبكة الكهرباء. من أجل تنظيم جهد ناقل التوتر المستمر في المرشح النشط المتوازي، تم تطوير منظم خطوة إلى الوراء (Backstepping) و اختباره. أعطى هذا المنظم أداءً ديناميكيًا أفضل مقارنة بالمنظم النسبي التكاملي (PI)، فهو لا يسبب تجاوزات في المراحل العابرة. أما في الحالة المستقرة فإن أداء منظم خطوة إلى الوراء و المنظم النسبي التكاملي متماثلان. Résumé : Dans cette thèse, nous présentons des réseaux de neurones de type Adaline pour le filtrage des courants harmoniques par un filtre actif parallèle. Ces réseaux de type Adaline possèdent une structure simple et facile à réaliser. L’identification de ces courants harmoniques sera réalisée par la méthode des puissances instantanée réelle et imaginaire et par la méthode du référentiel synchrone. Dans chacune de ces deux méthodes, nous avons développé les filtres d’extractions suivants : filtre multi-variable, filtre multi-variable neuronal et filtre passe-bas neuronal. Les filtres multi-variables opèrent dans le repère αβ et les filtres passe bas opèrent dans le repère dq. Ces différentes variantes des méthodes d’identifications sont testées par simulation dans le cas d’un filtre actif parallèle à trois fils et dans le cas d’un filtre actif parallèle à quatre fils. Les résultats des simulations obtenus montrent que les variantes neuronales d’identification donnent des performances excellentes. Afin d’identifier les courants harmoniques dans le repère des courants triphasés, nous avons présenté la méthode neuronale directe. Cette méthode est testée par simulation et élaborées expérimentalement sur un banc d'essai au laboratoire LEVRES. Les résultats obtenus ont été très satisfaisants et montrent l’efficacité du modèle proposé pour la dépollution du réseau électrique. Afin de réguler la tension du bus continu dans le filtre actif parallèle, la régulation par backstepping est développée puis testé. Le régulateur par backstepping a donné des meilleures performances dynamiques par rapport à celles du régulateur PI. Le régulateur par backstepping n’engendre pas de dépassements en régime transitoire. Par contre en régime permanent, il donne les mêmes performances que celles d’un régulateur PI.Item Computational Modeling of the Biofuel Combustion: Energy and Exergy Study(universty of eloued جامعة الوادي, 2022-09-28) غرايسة, نجاةالملخص: يعدّ الوقود المستخرج من البترول الأكثر انتشارًا في مجال النقل والمواصلات, بحيث ينتج عن عملية احتراقه تحويل الطاقة الكيميائية إلى طاقة ميكانكية في المحرك الحراري. كما تخضع عملية الاحتراق لمعايير معينة، مثل مصدر الوقود، وانبعاث الملوثات، والشروط البيئية، وفعالية الطاقة. في ضوء تطور المحاكاة الحاسوبية تعدُّ النمذجة العددية طريقة فعالة لمعالجة الظواهر المعقدة المتوافقة مع التي توجد في النظام التجريبي، وذلك لأن الدراسة التجربية مكلفة وتتطلب ظروفًا خاصة. ففي هذه الرسالة تمت دراسة الاحتراق المضطرب غير مسبق المزج لغرفة احتراق اسطوانية مزودة بعدة أنواع من الوقود مثل الوقود الحيوي, الميثان, الغاز الطبيعي, الغاز المميع, البروبان وفق مرحلتين. ففي المرحلة الاولى قمنا بمحاكاة الخصائص الايروكيميوحرارية للاحتراق باستخدام النماذج المقترنة: النموذج الديناميكي (k−ɛ) و نموذج الاحتراق (flamelet PDF). ومن ثم حساب المتغيرات التي تميز ظاهرة الاحتراق مثل السرعة، درجة الحرارة والأنواع الكيميائية (CO, CO2, H2O, OH, and NO). وفي المرحلة الثانية تطرقنا الى التحليل الترموديناميكي، بحيث طبقنا القانونين الأول والثاني للديناميكا الحرارية على جميع حالات احتراق الوقود المذكور آنفا للتنبؤ بفقدان الطاقة وتدمير الاكسيرجي، والكفاءات الموافقة. بعد ذلك قمنا بتقديم بعض التغييرات في الشروط النظامية لغرفة الاحتراق (عامل الهواء، درجة حرارة الهواء، ودرجة حرارة الوقود) لتحليل الفعالية الطاقوية للاحتراق وتحديد الظروف المناسبة التي تحسن الكفاءة وتقلل من ضياعها. ومن خلال النتائج المتحصل عليها تبين أن للوقود الحيوي قدرة عالية على المزج والاحتراق مقارنةً مع أنواع الوقود الأخرى، كما أنه يتميز بانخفاض انبعاث الملوثات (NO وCO). وبالتالي يمكن أن يكون الوقود الحيوي مصدرًا طاقويًّا واعداً من حيث انه وقود نظيف، وأيضا من الناحية الطاقوية أبدى قيمة فعالية جيدة مقارنةً بباقي أنواع الوقود المدروسة. Résumé : فرنسية أو انجلزية The petro-fuel is the most prevalent using in the transport sector because combustion is the process used to convert chemical energy to mechanical energy through the thermal engine. The combustion is the subject of many standards, such as a fuel source, pollutants emissions, environmental criteria, energy reliability, and efficiency. Besides, the development of computer simulation tools and mathematical models leads to introducing the complex phenomena those exist in the experimental system. Consequently, the simulation is considered as an effective way to address these phenomena because the experimental study is expensive and requires special conditions. In this thesis, we investigate the turbulent non-premixed combustion in a cylindrical combustion chamber supplied by many fuels such as biofuel, natural gas, LPG, CH4, and C3H8. Firstly, we simulated the aerothermochemical aspects of turbulent combustion focusing on the coupled models, such as the turbulent dynamic model (k−ɛ) and the combustion model (flamelet PDF). Therefore, we illustrated the computed parameters those depend on the combustion like the velocity, temperature, and chemical species (CO, CO2, H2O, OH, and NO). Then, we applied the First and Second Laws of thermodynamics for all fuels combustion cases considered previously to predict the energy loss, exergy destruction, and corresponding efficiencies. After that, we introduced some variations in the inlet conditions (air factor, air temperature, and fuel temperature) to analyze the combustion system performance and select the adequate conditions that improve the efficiency and reduce the losses in the considered systems. Biofuel presents a high ability to mix and burn relatively to other fuels; it is also characterized by low emissions of pollutants (NO and CO). Finally, biofuel presents a potential fuel in terms of clean fuel and energy efficiency compared relatively to the other fuel cases. Les pétrocarburants sont les plus utilisés dans le secteur de transport et la production de l’énergie, où il utilise la combustion afin de convertir l'énergie chimique en énergie mécanique ou électrique grâce au moteur thermique. En outre, la combustion est soumise aux certaines normes comme le carburant, émissions de polluants, critères environnementaux, fiabilité et efficacité énergétique. Par ailleurs, le développement des outils d’informatique et des modèles mathématiques a conduit d’introduire des phénomènes complexes identique de l’expérimental. Par conséquent, la simulation numérique est considérée comme un moyen efficace d'aborder ces phénomènes car l'étude expérimentale est coûteuse et nécessite des conditions particulières. Dans cette thèse, nous étudions la combustion turbulente non-prémélangée dans une chambre de combustion cylindrique alimentée par de nombreux carburants tels que le biocarburant, le gaz naturel, le GPL, le CH4 et le C3H8. Dans la première partie du travail, nous avons étudié les aspects aérothermochimiques de la combustion turbulente utilisant le couplage du modèle dynamique de la turbulence (k−ɛ) et le modèle de combustion (flamelet PDF). Ensuite, les paramètres caractérisant les différentes aspects de la combustion sont illustrées comme la vitesse, la température et les espèces chimiques (CO, CO2, H2O, OH et NO). La deuxième partie se base sur l’application de la première et la deuxième loi de la thermodynamique pour appliquer l’analyse énergétique et éxergétique afin de choisir le carburant le plus efficace énergétiquement. En plus, quelques techniques d’améliorations de la fiabilité du système sont appliquées (la variation du facteur d'air, température de l'air et température du carburant) pour analyser les performances du système de combustion et sélectionner les conditions adéquates qui améliorent l’efficacité et réduisent les pertes dans les systèmes considérés. Enfin, le biocarburant présente une grande capacité de mélanger et de brûler par rapport aux autres carburants ; qu’il se caractérise également par des faibles émissions de polluants (NO et CO). Aussi les résultats montrent que le biocarburant est une source potentielle en termes de carburant propre et d'efficacité énergétique par rapport aux autres types de carburants.Item Conditions contractives généralisées, points fixes communs et applications(University of Biskra جامعة بسكرة, 2015) Beloul, SaidL’objectif de cette thèse est l’étude d’existence et d’unicité des points fixes communs pour diverses applications, univoques ou multivoques, définies sur des structures métriques et liées par des conditions contractives. Plusieurs théorèmes de point fixe commun ont été établis et démontrés pour des applications qui satisfont une certaine commutativité comme la compatibilité, la compatibilité faible, la compatiblité de type (E) ou fortement tangentielles. Ces applications sont soumises à des conditions contractives, contractives de type Gregus, ou contractives de type integrales et qui sont, dans certains cas, implicitement liées sur des espaces métriques généralisés. Ces résultats ont été apliqués aux équations intégrales et aux équations fonctionnelles qui apparaissent dans la progammation dynamique. يهدف هذا البحث إلى دراسة وجود و وحدانية النقط الصامدة المشتركة لبعض التطبيقات، وحيدة القيم أو متعددة القيم تحت شروط تقلصية مختلفة، و في بنى مترية متنوعة. هذا من خلال نتائجنا المتحصل عليها و التي تحوي مبرهنات للنقط الصامدة المشتركة لتطبيقات. لتقلصات معممة و التي هي مستمرة بالتتابع الجزئي بضعف و متوافقة من الصنف(هـ) أيضا مبرهنات للنقط الصامدة لتطبيقات متماسة بقوة و متوافقة بضعف، تحت شروط تقلصية باستعمال دالة ضمنية و أخرى من صنف جريجيس (Gregus) في شكلها التكاملي. بعض المبرهنات لتطبيقات متماسة و متوافقة بضعف في فضاءات مترية جزئية، مبرهنتين للنقط الصامدة المشتركة صنف بيريند (Berinde) و في فضاءات مترية معممة و لقد دعمنا هذا العمل ببعض التطبيقات تخص المعادلات التكاملية، المعادلات الدالية، المعادلات التفاضلية.Item Conformation moléculaire, structure cristalline, spectroscopie vibrationnelle du dibromomésitylène. Conséquences des interactions intermoléculaires dans les halogénomésitylènes cristallisés(University of Constantine جامعة قسنطينة, 2013-12-15) Zeroual, SoriaDans ce travail on a choisi d’étudier le dibromomésitylène DBM hydrogéné et deutéré, ce composé est très intéressant, parce qu’il possède deux types de méthyles dans une même molécule : un méthyle quasi1 libre entouré par deux atomes de Br et deux autres méthyles très gênés. Les calculs DFT de la conformation moléculaire et des modes de vibrations en utilisant la fonctionnelle MPWP1W91 avec la base LanL2DZ(d,p) sont en bon accord avec la diffraction neutronique et les mesures spectroscopiques. On a ainsi attribué presque tous les modes de vibration. Les spectres IR, Raman et INS du DBM deutéré montrent un déplacement des fréquences des modes de vibration vers les faibles énergies par rapport à celles du DBM hydrogéné, ce qui est dû à l’augmentation du moment d’inertie. L’effet tunnel a été étudié par diffusion inélastique des neutrons, des éclatements tunnel sont mesurés à 390 ReV pour le CH3 du DBM hydrogéné et à 67 ± 2 ReV pour le CD3 du DBM deutéré. Ces valeurs correspondent au même potentiel gêneur. Un deuxième intérêt de cette étude est de compléter les travaux faits par notre équipe sur les trihalogénomésitylènes (TCM, TBM et TIM), en calculant les interactions intermoléculaires dans ces cristaux. في هذا العمل ، اخترنا دراسة ثنائي برومومسيتيلين ثنائي البروم ثنائي البروم المهدرج والمزيل للخلل DBM ، هذا المركب مثير جدًا للاهتمام ، لأنه يحتوي على نوعين من الميثيل في نفس الجزيء: ميثيل حر تقريبًا محاط بذرتي بروبيلين وميثيلين آخرين محرجين للغاية. تتوافق حسابات DFT للتشكيل الجزيئي وأنماط الاهتزاز باستخدام MPWP1W91 الوظيفية مع أساس LanL2DZ (d ، p) بشكل جيد مع حيود النيوترونات والقياسات الطيفية. وهكذا تم تحديد جميع أوضاع الاهتزاز تقريبًا. تُظهر أطياف IR و Raman و INS الخاصة بـ DBM المبلل تحولا في ترددات أوضاع الاهتزاز نحو الطاقات المنخفضة مقارنة بتلك الخاصة بـ DBM المهدرج ، والذي يرجع إلى زيادة لحظة القصور الذاتي. تمت دراسة تأثير النفق عن طريق تشتت النيوترون غير المرن ، وتم قياس رشقات النفق عند 390 ReV لـ CH3 من DBM المهدرج وعند 67 ± 2 ReV لـ CD3 من DBM المزيل. تتوافق هذه القيم مع نفس الإمكانات المزعجة. الاهتمام الثاني لهذه الدراسة هو إكمال العمل الذي أنجزه فريقنا على ثلاثي الهالوجين (TCM ، TBM و TIM) ، من خلال حساب التفاعلات بين الجزيئات في هذه البلورات.Item Contribution à l'amélioration de la stabilité des réseaux électriques par les nouvelles techniques d'optimisation(Universty of Eloued جامعة الشهيد حمة لخضرالوادي, 2023-05-22) BOUCETTA, IkramRésumé : فرنسية أو انجلزية Un mauvais contrôle du réseau électrique peut conduire à un effondrement total du système, entraînant des pertes économiques, écologiques et techniques. Par conséquent, l’amélioration de la stabilité du système électrique, en particulier la stabilité transitoire, est devenue l’un des plus fondamentaux sujets qui préoccupe les chercheurs en génie électrique. Cette thèse propose une approche d’optimisation développée qui fournit les paramètres de stabilisation optimaux des dispositifs de contrôle,(Stabilisateur du système d’alimentation (PSS), Proportionnel -Intégrale- Dérivative à base de PSS (PID- PSS) et le PID d’ordre fractionnaire à base de PSS (FOPID-PSS)), visant à améliorer la stabilité du réseau électrique en minimisant l’écart de la vitesse angulaire, en présence d’une perturbation grave en utilisant un nouvel algorithme hybride appelé Cycle de l’eau et la Flamme de papillon (WCMFO). Ceci est réalisé en imposant un incident thermodynamique sur le modèle de test bien connu SMIB (Réseau mono machine relié à un jeu de barres infini). D’autre part, une étude a été réalisée pour améliorer l’impact de l’intégration des sources d’énergie solaire (PV) sur la stabilité du système électrique. Cette étude est appliquée sur le fameux réseau test IEEE 30 JB. Les résultats expérimentaux obtenus ont prouvé la supériorité et l’efficacité de l’approche proposée en termes d’amortissement des oscillations et de réduction du dépassement, ainsi que l’amélioration du temps critique d’isolement de défaut. Ce travail de recherche a été développé sous l’environnement MATLAB/ SIMULINK et le logiciel PSAT (Power System Analysis الملخص: يمكن أن يؤدي ضعف التحكم في الشبكة الكهربائية إلى انهيار كامل للنظام، مما يؤدي إلى خسائر اقتصادية، بيئية وتقنية. لذلك، أصبح تحسين استقرار النظام الكهربائي، وخاصة الاستقرار العابر، أحد الموضوعات الأساسية التي تهم باحثي الهندسة الكهربائية. حيث تقترح هذه الرسالة نهج تحسين مطور يوفر معلمات الاستقرار المثلى لأجهزة التحكم (مثبت نظام الطاقة، المشتق النسبي المتكامل القائم على مثبت نظام الطاقة ومشتق الترتيب النسبي المتكامل القائم على مثبت نظام الطاقة)، بهدف تحسين استقرار النظام الطاقوي عن طريق تقليل انحراف السرعة الزاوية، في ظل وجود اضطراب شديد باستخدام خوارزمية هجينة جديدة تسمى دورة المياه وشعلة الفراشة، يتم تحقيق ذلك من خلال فرض حادث ديناميكي حراري على نموذج الاختبار المعروف (شبكة احادية الالة متصلة بقضيب بسبار لانهائي). تم إجراء دراسة لتحسين تأثير مصادر الطاقة الشمسية على استقرار النظام الكهربائي حيث تم تطبيق هذه الدراسة على شبكة الاختبار المعروفة (30 عقدة). أثبتت النتائج التجريبية التي تم الحصول عليها تفوق وكفاءة النهج المقترح من حيث تثبيط التذبذبات وتقليل التجاوز، وكذلك تحسين وقت عزل الخطأ الحرج. تم تطوير هذا العمل البحثي في ظل بيئة (ماتلاب/ سيميلنك) وبرنامج البيسات (صندوق أدوات تحليل نظام الطاقة).