4.Faculty of exact science_Seminars
Permanent URI for this community
Browse
Browsing 4.Faculty of exact science_Seminars by Issue Date
Now showing 1 - 20 of 146
Results Per Page
Sort Options
Item ETUD STRUCTURALE DE L’ALLIAGE CuXFe1-X NANOSTRUCTURE OBTENU PAR UNE METHODE HORS EQUILIBRE(University of Eloued جامعة الوادي, 2018-02-05) Mechri, H.; Azzaz, M.Le travail présenté consiste à élaborer des alliages hors équilibre à base de Cu et de Fe par mécanosynthèse. Notre étude est structurée en deux parties, la première concerne la synthèse des solutions solides sursaturées des alliages Cu1-xFex (x varie de 0.1 à 0.5) par mécanosynthèse. La seconde partie est la caractérisation structurale des alliages obtenus. Pour étudier l’évolution structurale et le phénomène d’interdiffusion entre les deux éléments ainsi que la formation des alliages, nous avons utilisé la diffraction des rayons X (DRX). Les résultats obtenus montrent la dissolution du fer dans la matrice FCC de cuivre après 30 h de broyage. Les mesures de diffraction des rayons X présentent une augmentation du paramètre structurel. On remarque une diminution de la taille des cristallites qui atteint une valeur de l’ordre de 14 nm, par contre, le taux de microdéformations augmente et atteint sa valeur maximale de 0. 53 % pour x=50% Fe.Item Spectroscopie des céramiques pour l’amélioration du rendement des cellules photovoltaïques(University of Eloued جامعة الوادي, 2018-02-05) Bensalem, C.; Boulma, E.; Diaf, M.; Khiari, S.This optical investigation of glass-ceramics formed by annealing glasses with compositions 50 GeO2 - 40 PbO - 10 PbF2 - x EuF3, x = [0.5; 1; 1.5; 2] and polycrystalline ceramics with composition 100 PbF2, y EuF3, with y = 5, 10, 15 and 20. For each material, the photoluminescence spectrum and the photoluminescence lifetimes of the 5D0, 5D1 and 5D2 Eu3+ levels are measured. Occurrence of β-PbF2: Eu3+ nanocrystallites in the glass-ceramics is confirmed and total ceramisation requires more than 10 % of EuF3 with respect to PbF2 in the starting glass. In the β-PbF2: Eu3+ ceramics and glass-ceramics, Eu3+ ions replace Pb2+ in their regular cubic site, but they interact together to form dimmers and higher nuclearity clusters. For the EuF3 rates investigated here, there are no isolated Eu3+ ions in the PbF2 lattice. A preliminary investigation of the optical properties of co-doped β-PbF2: Gd3+- Eu3+ ceramics was also performed. It shows that efficient Gd3+ → Eu3+ energy transfer occurs in these ceramics. The Pb2+ ions of the lattice may also be involved in the energy transfer process.Item EMISSION VISIBLE DES IONS Er3+ INCORPORÉS DANS LA MATRICE CRISTALLINE SrF2(University of Eloued جامعة الوادي, 2018-02-05) Djellab, S.; Diaf, M.Les paramètres Judd-Ofelt (JO) Ωt obtenus pour la matrice SrF2: Er3+ sont : Ω2= 1.226, Ω4= 1.106 et Ω6= 1.951 (en 10-20cm2) avec un écart δrms= 0.251×10-20 cm2. Ces paramètres donnent ensuite accès aux propriétés radiatives des ions Er3+ incorporés dans SrF2 comme les probabilités de transitions radiatives et les durées de vie radiatives des principaux multiplets émetteurs des ions Er3+. L'émission Stokes, dans le domaine visible, de la matrice SrF2: Er3+ a été élucidée et les spectres de déclin de fluorescence sont enregistrés pour mesurer les durées de vie de fluorescence des niveaux émetteurs.Item EFFECT OF ANNEALING ON OPTICAL PROPERTIES OF NiO:ZnO THIN FILMS(University of Eloued جامعة الوادي, 2018-02-05) Herissi, L.; Hadjeris, L.; Azizi, S.; Attaf, N.(ZnO)1-x(NiO)x thin films were prepared onto glass substrates by spray ultrasonic technique from zinc acetate dihydrate and nickel chloride hexahydrate solutions dissolved in distilled water. Substrate temperature, solution concentration, Nozzle-substrate distance and spray time were kept constant during all deposition process at 300°C, 0.05 mol/l, 7 cm and 15 min, respectively, with different values of x (x varies from 0.00 to 0.15). The annealing of these films were under air for 1 hour, at different annealing temperatures (300 °C, 400 °C and 500 °C). The aim of our work is to study the influence of nickel concentration and the annealing on the optical and electrical properties of (ZnO)1-x(NiO)x thin films.Item O-AMINUMBENZOYLHYDRAZIDUM DI CHLORIDE(University of Eloued جامعة الوادي, 2018-02-05) Gheribi, Rima.; Merazig, Hocine.; Ghallab, Rochdi; Dénès, GeorgesThe title compound was prepared and determined by x-ray diffraction analysis. The structure of the new compound crystalline in the triclinic system space group with a=4.817 (5)Å, b=9.150 (5)Å, C=12.033 (5)Å and α=109.161 (5)°, β=92.209 (5)°and γ=101. 155 (5)°, Z=2.The final refinement of goodness of fit on F2=1.052 The asymmetric unit of the compound contains two parts, one organic cation and two inorganic anion and the crystal structure was ensured by two types of interaction entered and intermolecular hydrogen bonds along the C axis N-H… Cl and N-H… O is resulting the formation of three dimensional Network and reinforcing the cohesion of the structure they have many area of application such us gas storage, catalyse...etcItem ELECTRONIC AND OPTICAL PROPERTIES OF ZnO: FIRST PRINCIPLE INVESTIGATIONS(University of Eloued جامعة الوادي, 2018-02-05) Benkrima, Y.; Bentouila, O.; Achouri, A.; Ouahab, A.Dielectric function and optical properties of oxide zinc (ZnO) nanostructure are studied by the first-principle computational within the framework of the density functional theory (DFT) using SIESTA code. The calculated lattice parameters and internal coordinates are in very good agreement with the experimental findings. Band structure, PDOS, real and imaginary parts of dielectric function, reflectance and absorbance has been calculated. A comparison with the previous studies has been made.Item STRUCTURAL, OPTICAL AND ELECTRICAL PROPERTIES OF BULK CuIn0.7Ga0.3Se2 SEMICONDUCTOR COMPOUND(University of Eloued جامعة الوادي, 2018-02-05) Gagui, S.; Hadjoudja, B.; Chouial, B.; Zaidi, B.; Chibani, A.In this work, we report on the study of structural, electrical and optical properties of the CuIn0.7Ga0.3Se2 compound. Analysis by X-ray diffraction showed that the prepared ingots are polycrystalline and of chalcopyrite structure. The preferential orientation in the plane (112) which is very suitable for the photovoltaic conversion was obtained. On the other hand, the lattice parameters a and c were calculated from the X-ray spectra, the c/a ratio was found to be equal to 2. Measurements of the electrical properties permitted us to get 7,645 Ω cm for the resistivity and 4,761.1016 cm-3 for the carrier concentration. Characterization by energy dispersive spectrometer (EDS) of the prepared ingots, allowed us to infer that their chemical composition is quasi-stoichiometric. Absorption measurements were performed using a UVVIS- NIR spectrophotometer and a value of 1.13 eV for the band gap width was obtainedItem CARACTERISATION PAR DRX DES MATERIAUX COMPOSITES A MATRICE THERMOPLASTIQUE (PEHD) RENFORCEE PAR DE FIBRES DE PALMIER DATTIER (FD)(University of Eloued جامعة الوادي, 2018-02-05) HACHAICHI, Amina; NEKAA, SoryaL’objectif de ce travail est d’élaborer et de caractériser un nouveau matériau composite à base de polyéthylène haute densité (PEHD) renforcé par des de palmier dattier (FD). L’inconvénient majeur que l’on rencontre pour ce type de système est l’incompatibilité avec la matrice PEHD. Pour pallier à cet inconvénient, la fibre de palmier dattier a été traitée par le permanganate de Potassium (KMnO4) pour améliorer la liaison à l'interface fibre/polymère. La méthode de diffraction des rayons X est l’une des méthodes les plus intéressantes pour caractériser les structures cristallines. D’après les résultats de ces analyses, on a observé que le taux de cristallinité des composites PEHD/FD à 30% de fibres non traitées et traitées a augmenté par rapport la matrice PEHD. D’autre part, nous remarquons que le traitement n’a pas d’influence importante sur le taux de cristallinitéItem STUDY OF PHASE TRANSFORMATIONS OF A SYNTHESIZED MULLITE(University of Eloued جامعة الوادي, 2018-02-05) Chargui, F.; Hamidouche, M.The use of ceramics as substrates for photovoltaic cells lends itself well to the various thin film deposition techniques. The mullite Al2O3-2SiO2 is a very good material for this application. It can be synthesized by different methods. The best indicated way is to enrich kaolin with alumina. In this work we studied the different transformations of phase of kaolin and kaolin- aluminum slag mixtures are studied. The raw materials used are local (from Algeria).During heat treatment, the kaolin- aluminum slag mixture undergoes several transformations of phase leading to the formation of mullite. The beginning of crystallization of the primary mullite is at 1000 ° C .The firing of the kaolin at 1400 °C led to the formation of the larger quantity of mullite but for the mixture led to the acceleration of the formation of secondary mullite. At 1500 ° C, the mullitization of the mixture is almost completeItem Numerical comparative study of Nd: YAG solar laser power in end-pumping and sidepumping configurations(University of Eloued جامعة الوادي, 2018-02-05) MEHELLOU, Saïd; REHOUMA, FerhatSolar-pumped solid-state lasers are promising for many applications. Since the report of the first sun-pumped solid-state laser, several pumping schemes have been proposed for enhancing the solar laser performance. Although the most efficient laser systems have end-pumping approaches, side-pumping configurations are very suitable for laser power scaling. Here we report numerical comparisons between the performances of Nd: YAG solar lasers by using either end-pumping or side-pumping techniques. In end-pumping configuration, a conical-shaped fused silica light-guide with 3D-CPC output end is used to transmit, compress the concentrated solar radiation from the focal zone of the parabolic mirror into a 4 mm diameter, 30 mm length Nd: YAG rod, within a conical pump cavity, which enables the multi-pass pumping through the laser rod. In side-pumping configuration, a fused silica light-guide with rectangular cross-section is used to collect nearly the same concentrated solar power from the focal zone. The guide also acts as a beam homogenizer by transforming the near-Gaussian profile of the concentrated light spot, incident on its input face, into a uniform rectangular light distribution at its output end. A 2D-CPC cavity is employed in this approach to enhance both the absorbed pump power and distribution along a 4 mm diameter, 30 mm length Nd: YAG rod. Uniform absorption along the rod is achieved, reducing the thermal loading problems. For 900W/m2 solar irradiance, the maximum solar laser power of 60 W is calculated for the end-pumping configuration, corresponding to 40 % enhancement over the collection efficiency of side pumping configuration.Item SYSTEME LASER SOLAIRE FONCTIONNE EN MONOMODE ET MULTIMODE POMPE PAR DIFFERENTS FORME DE GUIDES DE LUMIERE EN SILICE FONDUE(University of Eloued جامعة الوادي, 2018-02-05) Bouadjemine, R.; Liang, D.; Almeida, J.; Louhibi, D.; Kellou, A.Notre travail consiste à optimiser les différents paramètres de pompage d’un système laser solaire, en utilisant une technique de calcul numérique dit « Ray-tracing » à l’aide du logiciel ZEMAX. Il a aussi pour objectif d’optimiser les paramètres du résonateur optique afin d’obtenir un rendement laser maximum en régimes multimodes et monomode TEM00, en utilisant le logiciel LASCAD. Ce système laser est constitué d’un système de collection et de concentration des rayonnements solaires grâce à un héliostat-miroir parabolique, d’un guide de lumière en silice fondue, d’une tête laser constituée d’une cavité de pompage de différentes formes assurant un bon couplage des rayonnements solaires vers le barreau laser Nd :YAG, et d’un système de refroidissementItem ETUDE DES CONTRAINTES RESIDUELLES DANS LE VERRE RENFORCE PAR DOUBLE ECHANGE IONIQUE(University of Eloued جامعة الوادي, 2018-02-05) YOUNES, L.; HAMIDOUCHE, M.Dans ce travail, nous avons étudié les contraintes résiduelles induites par le procédé de double échange ionique du verre silico-sodo-calcique. Nous avons varié le temps d’immersion du premier échange ionique (simple échange : 20h, 30h et 40h). Ces échantillons ont subi un traitement de double échange ionique pendant 10min. Nous avons indenté les échantillons avec une charge de 5N, en utilisant un dispositif d’indentation instrumenté dont l’indenteur est de type Vickers. Les empreintes obtenues sont visualisées à l’aide d’un microscope optique équipé de deux filtres polarisants. Une opération de traitement d’images a été effectuée à l’aide d’un logiciel de traitement d’images. Il apparaît que le champs des contrainte résiduelles d’indentation est en relation directe avec la concentration de l’oxyde de potassium et l’oxyde de sodium en surface.Item CARACTÉRISATIONS OPTIQUES ET OPTO-ÉLECTRONIQUES DE COUCHES MINCES DE SILICIUM AMORPHE HYDROGÉNÉ(University of Eloued جامعة الوادي, 2018-02-05) Tata, S.; Laidoudi, L.; Cherfi1, R.; Chabane, L.; Rahal, A.Notre travail rentre dans le cadre des caractérisations optiques et opto-électroniques des couches minces à base de silicium amorphe hydrogéné (a-Si:H). Les couches ont été déposées à une température de porte substrat égale à 300 °C, par pulvérisation DC assistée d’un magnétron, sur plusieurs types de substrats compatibles avec les techniques de caractérisations utilisées. La spectrophotométrie UV-visible-IR a permis de déterminer l’épaisseur des couches, leur gap optique ainsi que leur indice de réfraction statique. Les jonctions Schottky (Au/a-Si :H) ont été caractérisées par la technique surface Photo-Voltage (SPV), qui permet d’estimer la longueur de diffusion des porteurs minoritaires, paramètre clé pour des applications photovoltaïques. Les résultats obtenus ont montré que les films élaborés sont photoconductreurs, et que les paramètres obtenus sont du même ordre que ceux rencontrés dans la littératureItem SIMULATION STUDY OF THE PHOTOTRANSPORT IN AMORPHOUS SEMICONDUCTORS FROM TIME-OF-FLIGHT PHOTOCURRENT ANALYSIS(University of Eloued جامعة الوادي, 2018-02-05) Serdouk, Fadila; Benkhedir, Mohamed-LotfiTime -of -flight transient photocurrent has been numerically analyzed. It is shown that the charge –carrier transit time can be determined in both non-dispersive and dispersive transport. It is also shown that the localized state distributions can be determined from the analysis of the photocurrentItem MECANISME DE TRANSFERT D’ENERGIE ET MESURE DES DUREES DE VIE EXPERIMENTALES DES PRINCIPAUX NIVEAUX EMETTEURS DES IONS Er3+ DANS DES CRISTAUX DE TYPE FLUORITE(University of Eloued جامعة الوادي, 2018-02-05) Boulma, E.; Bensalem, C.; Diaf, M.; Khiari, S; Jouart, J. P.Nous nous intéressons, dans le présent travail, à déterminer les durées de vie des principaux niveaux émetteurs 2P3/2, 4S3/2, 4F9/2 et 4I13/2 des ions Er3+ dopant une matrice cristalline de KY3F10 avec une concentration de 1% molaire. Les études que nous avons présentées ont été effectuées en utilisant une excitation monochromatique autour de 650 nm fournie par un laser à colorant. Les mécanismes d’excitation des émissions anti-Stokes observées sont essentiellement de deux types : Le premier fait intervenir une absorption à partir d’un niveau excité et le second est dû à un transfert d’énergie entre deux ions d’Erbium. Nous rapportons aussi les résultats d'une étude de la variation de l’intensité de la fluorescence en fonction de la puissance d’excitation. SUMMARY We are interested, in the present work, to determine the lifetimes of excited levels 2P3/2, 4S3/2, 4F9/2 and 4I13/2 of the Er3+ ions doped, with concentration of 1 % molar, in KY3F10 crystals. This study is carried out by using a monochromatic excitation around 650 nm provided by a tunable dye laser. There are two types of the excitation mechanism of anti-Stokes: the first involves an absorption from an excited level and the second is due to energy transfer between two ions of Erbium. We also report the results of a study of the variation of fluorescence intensity as a function of excitation power.Item CARACTERISATION PAR DIFFRACTION DES RAYONS X DE LA SOLUTION SOLIDE Ca0.5Sr0.5FeO2.5+δ(University of Eloued جامعة الوادي, 2018-02-05) MAHBOUB, Mohammed Sadok; ZEROUAL, Soria; BOUDJADA, AliL'échantillon du composé Ca0.5Sr0.5FeO2.5+δ a été synthétisé par solution solide à 1200°C. Le résultat final de l’affinement Le Bail du diffractogramme des rayons X sur poudres dans le groupe d’espace orthorhombique Imma nous a donné des valeurs correspondant aux trois phases ce qui signifie l'existence de la « miscibility gap ». La première phase Ca0.65Sr0.35FeO2.5+δ est enrichie en Ca avec les paramètres de mailles a=5.46799(18)Å, b=15.05175(62) Å et c=5.62380(18) Å, la deuxième Ca0.4Sr0.6FeO2.5+ est enrichie en Sr avec a=5.49090(53) Å, b=15.26665(126) Å et c=5.63900(84) Å, et la troisième Ca0.25Sr0.75FeO2.5+δ enrichie en Sr avec a=5.51623(68) Å, b=15.38207(186) Å et c=5.65523(61) Å, avec une valeur d'affinement final χ2=1.38.Item EXPRIMENTAL AND ANALYTICAL STUDY OF A PARABOLIC SOLAR CONCENTRATOR IN EL OUED CITY(University of Eloued جامعة الوادي, 2018-02-05) BOURAS, L; REHOUMA, FerhatThis study is focused on the parabolic solar concentrator, called the collector as well as the solar dish. The work is divided into two parts: Firstly, analytical analysis was done to study the effect of the geometrical and optical parameters on the spot focal. Secondly, to design a mini-prototype reflector with 63cm diameter, 6.2cm height, an aperture area of 1.24 m2and focal distance of 42 cm, the reflector surface was covered by silver chrome film. The cylindrical receiver is made of aluminium with 8.5cm diameter and 15cm length. The obtained results showed a significant increase in the temperature of the optical spot ranging from 200 to a maximum value of 850 °C. The distribution of the temperature on the receiver surface area showed clearly that the flux intensity increases gradually and a peak at the focus.Item ELABORATION AND CHARACTERIZATION OF ZNO NANOSTRUCTURE THIN LAYERS(University of Eloued جامعة الوادي, 2018-02-05) Ghougali, M.; Belahssen, O.; Chala, A.ZnO thin films have been deposited onto the glass substrates by chemical spray pyrolysis technique at 500°C. The effect of precursor molarity and crystallite size on structural, optical and electrical properties has been studied. The XRD lines of the deposited ZnO were enhanced with increasing precursor molarity due to the improvement of the layers crystallinity. It was shown that the average of the crystallite size of the deposited thin layers was calculated using Debye–Scherrer formula and found in the range between 30 and 95 nm. A strong c-axis preferred orientation is observed for all of the samples. As the growth temperature increases, the crystallite orientation of the ZnO (002) plane is not changed, but the full width at half maximum gets smaller. The optical properties have been discussed in this work. The transmittance (T) and the absorbance (A) were measured and calculated. Band gap energy is considered one of the most important optical parameter, therefore measured and found ranging 3.285 eV. The increase of the electrical conductivity to maximum value of 0.0695 (Ω cm)−1 can be explained by the increase in carrier concentration of the films. A good electrical conductivity of the ZnO thin film is obtained due to the electrically low sheet resistance. ZnO can be applied in different electronic and optoelectronic applications due to its band gap, high transparency and good electrical conductivity.Item INFRARED AND RAMAN SPECTROSCOPY STUDY OF Y3Al5O12 NANOCERAMICS DOPED 50% Ho+3(University of Eloued جامعة الوادي, 2018-02-05) Ianez, I.; Rekik, B.; Derbal, M.The cubic garnet is one of the most important categories of materials. Essentially it dedicated to the field of Optics: Yttrium Aluminum Garnet (YAG) representing a host of good choice matrix. In this research work, we made the synthesis by reaction in the solid state; to get high powder (YAG) ceramics quality doped 50% with trivalent holmium ions. Deep phonon vibrational studies on optical properties by IR spectroscopy and Raman of the compound Y3Al5O12 (YAG) doped 50% Ho + 3 presented by the spectra IR and Raman sets or the characteristic IR absorption bands of bonds M - O (M = Y, Al) and active modes of internal vibration associated with the different frequencies of the material YAG: 50% Ho + 3 are confirmed through the spectra of IR and Raman of the YAG respectively [1.2].Item DOPAGE ELECTROCHIMIQUE D’OXYDE DE ZINC PAR L’ERBIUM POUR L’APPLICATIONS AUX PHOTOVOLTAÏQUE(University of Eloued جامعة الوادي, 2018-02-05) TOURI, F.; SAHARI, A.; ZOUAOUI, A.Le ZnO présente également des propriétés photovoltaïques pour la réalisation de cellules solaires ou de photopiles .L’utilisation des éléments terres rares comme dopants pour objectif d’améliorer les propriétés optiques de ZnO. Dans le cas des cellules solaires photovoltaïques, ZnO dopé parles élements terre rare est susceptible d’apporter une meilleure absorption des photons solaires perdus par thermalisation ou par transparence à travers la cellule photovoltaïque conventionnelle. Dans ce travail nous avons élaborés des couches minces de ZnO et de ZnO dopé d’erbium (1%, 2%, 3%) Er par voie électrochimique.La caractérisation des couches minces obtenues à été faite par la diffraction des rayons X, la photoluminescence et la microscopie à force atomique (AFM). La DRX a permet de confirmer la formation de ZnO avec une structure hexagonale de type wurtzite avec une direction préférentielle suivant (002.La photoluminescence montre l’incorporation des ions d’erbium dans le réseau de ZnO.