Influence of annealing temperature on structural and optical properties of ZnO: In thin films prepared by ultrasonic spray technique

Abstract

Transparent conducting indium doped zinc oxide was deposited on glass substrate by ultrasonic spray method. The In doped ZnO samples with indium concentration of 3 wt.% were deposited at 300, 350 and 400 °C with 2 min of deposition time. The effects of substrate temperature and annealing temperature on the structural, electrical and optical properties were examined. The DRX analyses indicated that In doped ZnO films have polycrystalline nature and hexagonal wurtzite structure with (0 0 2) preferential orientation and the maximum average crystallite size of ZnO: In before and annealed at 500 °C were 45.78 and 55.47 nm at a substrate temperature of 350 °C. The crystallinity of the thin films increased by increasing the substrate temperature up 350 °C, the crystallinity improved after annealing temperature at 500 °C. The film annealed at 500 °C and deposited at 350 °C show lower absorption within the visible wavelength region. The band gap energy increased from Eg = 3.25 to 3.36 eV for without annealing and annealed films at 500 °C, respectively, indicating that the increase in the transition tail width. This is due to the increase in the electrical conductivity of the films after annealing temperature.

Description

Article

Keywords

In doped ZnO;Thin films ;TCO ;Ultrasonic spray technique

Citation

Said Benramache, Boubaker Benhaoua, Influence of annealing temperature on structural and optical properties of ZnO: In thin films prepared by ultrasonic spray technique, Superlattices and Microstructures, Volume 52, Issue 6, 2012, Pages 1062-1070,