Department of physics

Browse

Recent Submissions

Now showing 1 - 20 of 198
  • Item
    زغبة ؽبقخ اىفدىح ثطشقز لأغش خٍ NiO/FTO اى سَؼشح ثزق خٍْ اىشػ اىن
    (university of eloued جامعة الوادي, 2023-06-07) تواتي حمد, التجاني
    ضط كٔٞ ٛ ًٙ ج ىُ جٌ سْ قٞ ضك ٤ِ ج هُٛحتٙ ج رُ ٤٘س ٝج رُٛ ٣ٍس ٝج ٌُٜ ذٍحت ٤س طُروس NiO/FTO ذط جٍ ٤ً هٓط لِس 0.3M ئ ٠ُ 0.5M ( ، ض ضكٟ ٤ ٛ ًٙ جلأؿ ٤ٗس ج هٍُ ٤وس لأ ٤ًٓى ج ٤ُ٘ NiO ( ػ ٣ٍ ٠ ن ض ٤ٍْد ج كُٔ ِٞ ػ ٠ِ حًٌت ؾَحؾ ٤س طٓ ٤ِس رٓٓواًح ذ FTO ، ٝض صٔ ػ ٤ِٔس ج طُ ٤ٍْد ذح طْهىج ضو ٤٘س ج ج ٤ٔ ٤ٌُ حت ٢ ج كُ جٍ ١ٌ ضكص و ؾٌس ق جٍ زٌ ضر ؾِ 485 و ؾٌس ثٓٞ ٣س، ه حٔ٘ ذك حٓخ ٠حهس ج لُؿٞز ذط ٣ٍوط ٤ ج طُ ٣ٍوس ج ؼُٔطحوز ٝ ج طُ ٣ٍوس ج كُى ٣ػس، ك حٌ صٗ طٗحتؽ ج طُ ٣ٍوط ٤ طٓوح ذٌس ق ٤ع ٣ جلاػط حٔو ػ ٠ِ ج طُ ٣ٍوس ج ؿُى ٣ىز نحٚس ك ٢ ذ ٤ح حٗش ج لُ٘حي ٣س ج طُ ٢ ض طٔح ذو ٤ و ٤ٗح ٝ ػظ ٠ٔ ٝجٞكس، حًٔ أظٜ شٍ طٗحتؽ ضك ٤ِ جلأ ؼٖس ج ٤٘ ٤ُٓ س ظٜٞ ه لأ ٤ًٓى ج ٤ُ٘ ك ٢ ؾ ٤ٔغ ج طُ جٍ ٤ً ج طُٔٓهى سٓ، ٝض ضأ ٤ًى ٛ جً جلأ نلا ج حُٔٗٛىز ذح طْهىج ج ؿُٜٔ جلإ طٌُ ٍٝ ٢ٗ ج حُٔ فْ MEB ٠حهس أٝ ذٌحل ، ض ض ؿٓ ٤ ج هٗلحٜ ك ٢ ه ٤ ج لُ٘حي ٣س ٝج لُحٚ ج طُحه ٢ غٓ ٣َحوز ج طُ ٤ًٍ ،ُ ذ ٤ ح٘ٔ جَوش ه ٤ ٝجلا طٓٛحٚ ٤س. ٝذ ِص ه ٤ سٔ ج لُحٚ ج طُحه ٢ 3.86 eV ػ ى٘ ج طُ ٤ًٍ 0.3M غ ض ح٘هٛص ئ ٠ُ 3.75 eV ػ ى٘ ج طُ ٤ًٍ 0.5M ٤ْ ٌٞ جلأكٟ ك ٢ ج طُطر ٤وحش ج هُٔط لِس ػٓ ج هُلا ٣ح ، ٝ ٤ٗ ٣ ي يُ ئ ٠ُ أ ج طُ ٤ًٍ جلأن ٤ ج ٤ُٗٔٓس ٝؿ ٤ ٍٛح.This study focuses on the analysis of the structural, optical, and electrical properties of NiO/FTO thin films with varying concentrations from 0.3M to 0.5M. The NiO thin films were prepared by depositing the solution onto pre-coated FTO glass substrates using the thermal chemical spray technique at a temperature of 485°C. We calculated the band gap using both conventional and modern methods, and the results from both methods were consistent. The modern method, especially for the transmittance data, proved reliable with clear minimum and maximum values. X-ray analysis confirmed the presence of NiO peaks in all used concentrations, which was also observed through scanning electron microscopy (SEM). The transmittance and band gap values decreased with increasing concentration, while the Orbach energy and absorbance values increased. The band gap value was 3.86 eV at a concentration of 0.3M, and it decreased to 3.75 eV at a concentration of 0.5M. This indicates that the higher concentration is more suitable for various applications such as solar cells and others.
  • Item
    دراسة مقارنة بين تأثير الزعانف العمودية والمائلة على أداء المقطر الشمسي
    (university of eloued جامعة الوادي, 2023-06-07) بن علي, لويزة; مومن مسعود, سارة
    تفاقم مشكلة نقص المياه الصالحة للشدرب فدي المنداطق المعزولدة دفعندا لاسدتغلال تقنيدة التقطيدر الشمسدي لتحليدة الميداه المالحدة. تدم تحسدين أداء المقطدر الشمسدي البسديط عدن طريدق إضدافة زعدانف حديدية حيا زادت مساحة التقداط الإشدعاع الشمسدي وفتدرة تخدزين الطاقدة ولكدن ظدل الزعدانف أثدر على إنتاجية المقطر. قمنا في هذا العمل التجريبي بمقارنة أداء ثلاث مقطرات شمسية بسديطة تحتدوي كل منها على صفيحة حديدية بنفز الأبعاد يحتوي أحدهما على زعانف حديدية عمودية وااخر علدى 1.2 وإرتفاعهدا cm زعانف حديدية مائلة بزاوية ° 45 عن الأفق لهذه الزعانف نفز الأبعداد )قطرهدا 3( و الثالا شاهد أظهرت النتائج أن استخدام الزعانف الحديدية خاصة الزعانف المائلة يعزز cm أداء المقطرات الشمسية حيا تم تحسين إنتاجية المقطر المحسن بالزعدانف المائلدة بنسدبة % 70.32 و تحسين إنتاجية المقطر المحسن بالزعانف العمودية بنسبة % 37.75 مقارنتا بالمقطر الشاهد.The exacerbation of the problem of lack of potable water in isolated areas prompted us to exploit the solar distillation technique to desalinate salty water. The performance of the single slope solar distiller was improved by adding iron fins, as the solar radiation capture area and energy storage period were increased, but the shadow of the fins affected the distiller's productivity. In this experimental work, we compared the performance of three single slope solar distillers, each containing an iron plate with the same dimensions, first distiller containing vertical iron fins and the second distiller containing iron fins inclined at an angle of 45° from the horizon, these fins have the same dimensions (1.2 cm in diameter and 3 cm in height), and the third distiller is a witness. The results showed that the use of iron fins, especially the oblique fins, enhances the performance of solar distillers, as the productivity of the improved distiller with oblique fins was improved by 70.32%, and the productivity of the improved distiller with vertical fins was improved by 37.75% compared to the witness distiller.
  • Item
    دراسة حول إنتاج الهيدروجين باستخدام الطاقة الشمسية
    (university of eloued جامعة الوادي, 2023-06) اسحيمي, شهيرة; بن دومة, سكينة
    في هذا العمل تم التطرق إلى مفاهيم عامة حول الطاقة الشمسية والألواح الكهروضوئية وكيفية صناعتها وأنواعها. وتم التعرف أيضا على خصائص غاز الهيدروجين وأنواعه وطرق إنتاجه. من بينها التحليل الكهربائي بواسطة تقنية PEM المسؤولة عن فصل جزيء الماء إلى هيدروجين وأكسجين. كما تم تطبيق عدة تجارب قصد إنتاج غاز الهيدروجين من الماء المقطر بواسطة الطاقة الشمسية، الجهاز المستخدم يحتوي على خمس وحدات: وحدة حمل، وحدة قياس، لوح شمسي، محلل كهربائي وخلية وقود يعملان بتقنية PEM . تمت أيضا دراسة كفاءة اللوح الشمسي والمحلل فلوحظ أن هناك علاقة طردية بين الإشعاع الشمسي الساقط وتدفق غاز الهيدروجين المنتج، كذلك لوحظ زيادة حجم الغاز المنتج مع مرور الزمن.In this work, general concepts about solar energy and photovoltaic panels, their manufacturing processes, and types were addressed. Additionally, an introduction to the properties of hydrogen gas, its types, and production methods was provided. Among these methods is the electrochemical analysis using the PEM (Proton Exchange Membrane) technology, responsible for separating water molecules into hydrogen and oxygen. Several experiments were conducted to produce hydrogen gas from distilled water using solar energy. The device used consisted of five units: a load unit, a measurement unit, a solar panel, an electrical analyzer, and a fuel cell, all operating with PEM technology. The efficiency of the solar panel and the analyzer was also studied, and it was observed that there is a direct relationship between incident solar radiation and the flow of produced hydrogen gas. Additionally, an increase in the volume of the gas produced over time was observed
  • Item
    دراسة تحسين أداء المجفف الشمسي بمساعدة مواد تخزين الطاقة تحت شروط طقس مدينة الوادي الجزائر
    (university of eloued جامعة الوادي, 2023-06-08) داودي, عبد العالي; شوشاني, محمد علي
    تعتبر الشمس مصدر طاقة نظيف ومتجدد، لذي وجب إستغلالها في عدة مجالات لغرض التقليل من مصادر الطاقة الأحفورية التقليدية في هذا العمل، تمت دراسة ميدانية الهدف منها تحسين أداء وكفاءة المجفف الشمسي ذو الماص المقلوب تحت ظروف تشغيل حقيقة في جامعة الوادي وذلك بإدخال مواد حافظة وخازنة للحرارة الحصى الأسود والكربون( على مستوى غرفتي التجفيف، كما تم عزل هذه الأخيرة بمادة بولسترين عن الوسط الخارجي لحفظ ضياع الحرارة وجودة البطاطا المجففة، كما تم وضع المجفف على محور دوار لإستقبال أقصى شدة للإشعاع. تم العمل التجريبي في يوم تميز بإشعاع شمسي معتبر ) 22 ماي 2023 (، وبإتباع جملة من الخطوات التجريبية للحصول على أفضل النتائج، حيث كانت نتائج عمل المجفف المحسن مرضية ومقبولة خاصة دور المواد الخازنة للحرارة فبلغ متوسط الكفاءة اليومي للمجفف الشمسي ذو الماص المقلوب حتى 18 إلى 35% في النصف الأول من إختبار التجفيف، كما كانت كفاءة المجفف بمساعدة الكربون أعلى من كفاءة المجفف بمساعدة الحصى الأسود.The solar is a renewable energy source, which must be exploited in several areas for the purpose of reducing traditional energy sources. In this work, a study was conducted aimed to improve the thermal performance of the inverted absorberolar dryer under real climatic conditions (El-Oued University). The solar dryer integrated with energy storage materials (Gravel Black and Activated Carbon) in the drying room, and the latter was isolated with polystyrene to preserve the heat loss and the quality of the dried potatoes. As well, the dryer was placed on a controlling angle arm to receive the maximum intensity of radiation. The experimental work was carried out on a day characterized by significant solar radiation (May 22, 2023), and by following a number of experimental steps to obtain the best results, where the results of the improved dryer work were satisfactory and acceptable, especially the role of heat-storing materials. The average daily efficiency of the inverted absorbent solar dryer reached 18 to 35% in the first half of the drying test, and the efficiency of the carbon-assisted dryer was higher than that of the black gravel-assisted dryer.
  • Item
    دراسة تأثير المعالجة الحرارية على الخواص الفيزيوكيميائية لمادة الكوارتز
    (university of eloued جامعة الوادي, 2023-06-08) قطوطة, هناء; حماتي, إبتسام
    تم في هذا العمل دراسة تأثي ر المعالجة الحرارية على الخوا ص الفيزيوكيميائية لمعدن الكوارتز الموجو د في رمل منطقة دوار الماء الواقعة بمدينة الوادي. المعالجة الحرارية لعينا ت الرمل أجري ت عن د درجا ت الحرار ة 200 ، 400 ، 800 ، 1000 ، و 1200 م° لمدة 7ساعا ت متواصلة. بين ت مطيافية الاشعة تح ت الحمراء ) IR ) ومطيافية انعراج الاشعة السينية ) XRD ( ان عينة الرمل الطبيعية تتكون من نسبة عالية من معدن الكوارت ز طور الفا ) 2SiO-α( ونسب ة ضئيلة من معدن الكالسي ت ) 3CaCO ( ومعدن الفلدسبار ) 8O3AlNaSi (. كم ا أوضح ت التقنيا ت الطيفية المستعملة أن المعالجة الحرارية أد ت الى تفكك كلي لمعدن الكالسي ت عن د درج ة الحرارة 200 م°، وتفكك معدن الفلدسبار عن د درجة الحرارة 1000 م°، وظهور طور الكريستوبالي ت ) 2Sio ) الى جان ب طور الكوارتز عن د 1200 م°. كما نتج عن المعالجة الحرارية للرمل تحسن لمؤش ر التبلور لمعد ن الكوارتز. كذلك سجل ازدياد للحجم الحبيبي لمادة الكوارتز مع ارتفاع درجة الحرارةtreatment on the physicochemical properties of the mineral quartz of the sand of the Douar-Elmaa, area located in El-Oued city, was studied. Heat treatment of sand samples was carried out at different temperatures 200, 400, 800, 1000, and 1200°C for 7 continuous hours. Infrared (IR) and X-ray diffraction (XRD) spectroscopy showed that the natural sand sample consists of a high percentage of alpha-quartz (α-Sio2) and a small percentage of calcite (CaCO3) and feldspar (AlNaSi 3O8) mineral. The used spectroscopic techniques also showed that the heat treatment led to the complete dissolution of calcite mineral at a temperature of 200 °C, and the dissociation of feldspar mineral at a temperature of 1000 °C, and the appearance of the Cristobalite (Sio2) phase, a polymorph mineral of quartz phase at 1200 °C. The heat treatment of the sand also resulted in an improvement of the crystallinity index of the quartz mineral. However, an increase in the particle size of quartz
  • Item
    دراسة اللاخطية الضوئية كخاصية فيزيائية لأكسدة الصصدير ( SnO2 )
    (university of eloued جامعة الوادي, 2023-07-08) بىصبيع العايش, عبيز; , نذيز بك
    حى اسخخذاو حق تٍُ انزش بالا سَلال انسزاري نهفىهت ان خًسزكت نخزس بٍ انشزائر انزق قٍت لأكس ذٍ انقصذ زٌ (SnO2) ان قُ تٍ و ان طًع تً بانفهىر ب سُب يخخهفت (2%,4%,6%) عهى ركائش سخاخ تٍ يسخ تُ زخى انذرخت 480˚C . ز ثٍ أ انهذف ي هذ انذراست هى يعزفت حأث زٍ سَبت انخطع ىٍ عهى كم ي انخصائض انب ىٍُ تٌ و انخصائض انضىئ تٍ انخط تٍ و غ زٍ انخط تٍ ن (SnO2) , ز ثٍ أظهزث أط اٍف ا عَزاج الأشعت انس تٍٍُ XRD) ( بأ نهشزائر ان زًسبت ب تٍُ رباع تٍ انشوا اٌ ي ىَع روح مٍ يع ىًَ حفض هٍ وفق الاحدا ) 111 (, أيا انخصائض انضىئ تٍ فسذدث ب طً اٍف تٍ (UV-Vis) ف ان دًال ان زًئ نهط فٍ انكهزويغ اُط سٍ ز ثٍ حخزاوذ شفاف تٍ انع اٍُث ي ) 70% إنى 87% (, أيا فدىة انطاقت نهشزائر حخزاوذ ي ) 3.54eV إنى 3.78eV (, أيا يعايم الايخصاص و يعايم الا كَسار ف خًٍهكا ق ىٍ ي خُفضت. ح خًهك انع اٍُث اسخدابت غ زٍ خط تٍ عان تٍ ي انذرخت انثانثت, و أعطج خَائح حطب قٍ حقز بٌ Sheik-Bahae ق ىٍ قز تٌُ الا كَسار غ زٍ انخط تٍ ف زذود 1,3.10-8cm2/W كذنك يعايم الايخصاص غ زٍ انخط خٌزاوذ ب 40-70 cm/W ف ان دًال ان زًئ نهط فٍ انكهزويغ اُط سٍThermometric decomposition technique was utilized to deposit thin slices of tin oxide (SnO2) pure and doped with varying proportions (2%, 4%, 6%) on heated glass substrates up to 480°C. The objective of this study was to examine the impact of the deposition rate on the structural, linear, and non-linear optical properties of SnO2. X-ray diffraction (XRD) analysis revealed that the deposited slides exhibited a quadrangular crystal structure similar to Rotel, with preferential growth along the (110) direction. In terms of optical characteristics, spectroscopy (UV-Vis) was employed to analyze the samples within the visible range of the electromagnetic spectrum. The transparency of the samples ranged from 70% to 87%, while the energy band gap of the slides varied from 3.54 eV to 3.78 eV. The absorption and refraction coefficients were found to be low. Additionally, the samples exhibited a high third-order nonlinear response. The Sheik-Bahae approximation method yielded nonlinear refraction values in the range of 1.3 × 10-8 cm2/W, and the nonlinear absorption coefficient ranged from 40 to 70 cm/W within the visible range of the electromagnetic spectrum.
  • Item
    دراسة الخصاىص الفيزيائية لاغشية الرقيقة لاكسيد النيكل المطعمة بالفضة
    (university of eloued جامعة الوادي, 2023-06-07) خلايفة, اسماعيل; مسعودي, ضو
  • Item
    دراسة الخصائص البصرية والبنيوية لأغشية أكسيد النيكل المطعمة بالألمنيوم
    (university of eloued جامعة الوادي, 2023-06-08) غرايسة, فاطمة الزهرة; قصير, ريان
    تضمن هذا العمعل دراسعة الدصعائ البنيويعة، الضعوئية والكهربائيعة عية رقيقعة معن أ سعيد النيكعل 10 ( و لك انطلاقا من مادت نترات -08-06-04-02- بنس (% 00 )Al والمطعم با لمنيوا )NiO النق حيعث تعم ترسعي محلعوا المعادتين )Al (NO3 3 .9H2O) ونترات ا لمنيوا )Ni (NO3)2 .6H2O النيكل 450 ( بتقنية الرب باانحلاا الكيميائ الحرار ، أرهرت نتائ C° على ر ائز زجاجية تحت درجة حرارة انعراج ا شعة السينية أن ا ية المحضرة ات تر ي بلعور مكعبع فع ااتجعاه المفضعل 200 ( لجميع - 912.04cm- وجعود رابطتعين يميعائيتين فع نطعا التعرددات ( 1 )FTIR ا ية. بينت نتعائ فحوصعات وال انية تععزى )O-H أو )N-H 756.086-766.114 (، القمة ا ولى قد تكون إما إلى cm- 900.57 ( و 1 أما فيما يتعلق ،(DRX) ورجحت أن تكون سيد النيكل حس نتائ )Ni-O أو )Al-O أن تكون إما إلى -4- فقد أرهرت تحس ن ا ف شفافية العينات المطعمعة بعا لمنيوا عنعد نسع التطععيم (% 2 )UV-VIS بالنتائ 10 ( التع قاربعت % 95 وهع تدع أعلعى نسعبة تطععيم % 10 (، وبالنسعبة للمقاوميعة السعطحية فقعد شعهدت ارتفاعا بيرا بعد التطعيم.This work included a study of the structural, optical and electrical properties of thin films of pure nickel oxide (NiO) and doped with aluminum (Al) with percentages (00-02-04-06-08-10 %). It was based on the two materials, nickel nitrate (Ni (NO3)2 .6 H2O) and aluminum nitrate (Ni (NO3)3 .9 H2O), where a solution of the two materials was deposited on glass substrates under a temperature (450°C) by chemical spray pyrolysis technique. The X-ray diffraction results showed that the prepared films have a cubic crystalline structure in the preferred direction (200) for all films. The results of the FTIR tests showed the presence of two chemical bonds in frequency range 766.114-756.086 cm-1 and 912.04-900.57 cm-1, the first peak may be either(N-H) or(O-H) and the second is attributed to being (Ni-O) or (Al-O) and it was likely to be the Nickel oxide according to )DRX results. The results of (UV-VIS) showed an improvement in the transparency of the doped samples with aluminum at the doping percentages (%) (2-4-10), which approached 95%, and it belongs to the highest doping percentage (10%), and as for the surface resistance, it witnessed a significant increase after doping.
  • Item
    د ا رسة تجريبية حول تحسين خواص جبس منطقة الفولية بالوادي
    (university of eloued جامعة الوادي, 2023-06-08) بالهادف, أسماء; طويل, سهيلة
    اهتمت هذه الدراسة بإمكانية تحسين جودة جبس منطقة الفولية ولاية الوادي قليل الجودة ليضاهي أو يقارب جبس باريس لأقصى قدر ممكن، حيث تم تحضير عينات من مسحوق الجبس و تحميصها وفق درجات حرارة مختارة بدقة و هي محصورة بين C ° 150 و C ° 170 ثمّ عولجت هذه العينات باستعمال تقنية انعراج الأشعة السينية XRD و بالاستعانة أيضا بتقنية فلورية الأشعة السينية XRF . بينت نتائج تحسين أطياف إنعراج الأشعة السينية المتحصل عليها باستعمال طريقة ريتفيلد أنه بالإمكان تحويل الجبس ذو الصيغة الكميائية O) 2• 2H 4(CaSO إلى باسينيت أو ما يعرف بجبس باريس ذو الصيغة الكيميائية O) 2• ½H 4(CaSO و بنسب تعتبر جيدة جدا و ذلك باتباع الطريقة الصحيحة أثناء معالجته و التي تجعله يفقد ثلاثة أرباع ماءه ) O 2 ¾H (، كما يمكن أيضا إعادة تدوير الجبس و ذلك بإعادة تحميصه لتحسين نسبة جبس باريس المتواجدة فيهThis study aimed to improv e the low quality gypsum in the Alfouliya region of Eloued province, so that it c ould match w ith the Paris plaster as much as possible. Gypsum samples were p repared and calcined at carefully selected temperatures raning from 150°C and 170°C these sampeles were treated using the X ray powder diffraction XR P D technique , as well as the X ray fluo rescence techn ique XRF )). Obtained results using Rietveld refinement showed that it is possible to transform gypsum with the chemical formula CaSO 4 2H 2 O to Paris plaster CaSO 4 ½H 2 O with very good proportions by following the correct method during i ts treatment which makes it lose ¾H 2 O . Gypsum can also be recycle d th rough plaster through re roasting it in order to increase the proportion of Paris plaster that it has after the construction process.
  • Item
    تحضير ودراسة فيزيوكيميائية لأغشية كبريتيد الكوبالت المحضرة بطريقة الرش الكيميائي الحراري
    (university of eloued جامعة الوادي, 2023-06-08) زكري, نور الامان; نغموش علي, حليمة
    This work included the preparation and study of optical properties of cobalt sulfide thin films, the prepared films were deposited on clean glass substrates at different temperatures (250, 300, 350, 400 °C) by chemical pyrolytic spray technique. The study is done in the range of wavelengths (350-900 nm) by using a spectroscopic apparatus for visible and ultraviolet rays (UV-VIS), the results showed that all the optical properties of the films were affected by the increase in temperature where the transmittance witnessed a remarkable increase until it reached about (1.50 %) within the region of the visible spectrum at temperature (400 °C). Also, the band gap was found to decrease from 1.82 to 1.65 eV by increasing the temperature , while the value of Urbach energy decreased from 0.214 eV to 0.174 eV by increasing the temperature. For FTIR infrared measurements the results showed Co- S bonding at the frequency of 482.2 cm-1 . The results of the X-ray diffraction showed that the prepared thin layer are cube according to the international standard of measurements JCPDS 1703- 073-01 and the preferred growth of the slice is (440).تحضير ودراسة الخصائص الفيزيائية والكيميائية للأغشية الرقيقة لكبريتيد الكوبالت ، حيث تم (250,300,350,400C°) ترسيب الأغشية المحضرة على ركائز زجاجية نظيفة عند درجات حرارة مختلفة الأرضية 350-900 ) وذلك باستخدام جهاز nm) بواسطة تقنية الرش الكيميائي الحراري. تمت الدراسة في مدى الأطوال الموجية فقد أظهرت النتائج تأثر جميع الخصائص البصرية للأغشية ، ( UV -VIS) التحليل الطيفي للأشعة المرئية وفوق البنفسجية بزيادة درجة حرارة الأرضية حيث شهدت النفاذية تزايدا ملحوظا حتى وصلت إلى حوالي ( % 1.50 ) ضمن منطقة الطيف 1.65 بزيادة درجة eV 1.82 إلى eV 400 ) ، أيضا وجد أن الفاصل الطاقي قد تناقص من C°) المرئي عند درجة الحرارة 0.174 بزيادة درجة الحرارة. أظهرت قياسات eV 0.214 إلى eV الحرارة في حين أن قيمة طاقة أورباخ تناقصت من 482.2 . أظهرت نتائج انعراج الاشعة السينية أن cm- الموافقه للتردد 1 Co-S بروز الرابطة FTIR الاشعة تحت الحمراء والنمو المفضل للشريحة JCPDS 1703-073- الاغشية المحضرة ذات تركيب مكعب حسب البطاقة الدولية للقياسات 01 .( هو( 440
  • Item
    تحسين كفاءة منظومة الليزر الشمسي ب Nd: YAG باستعمال التطعيم المضاعف بواسطة:
    (university of eloued جامعة الوادي, 2023-06-07) بن عبد الله, الهام; بن علي, منيرة
    تحول أشعة الشمس المركزة إلى ليزر وذلك من خلال توجيهها نحو الوسط الفعال، حيث تحدد الاستطاعة الممتصة من طرفه. يعتبر الوسط الفعال ) Nd: YAG ( الأكثر شيوعا نظرا لخواصه الفيزيائية والحرارية الممتازة وبالرغم من ذلك فإن نسبة التطابق بين طيف امتصاصه وطيف انبعاث الشمس تبلغ % 06 وهي نسبة ضعيفة نسبيا. قصد تحسين كفاءة التحويل )ضوء الشمس إلى ضوء ليزر( قمنا في هذا العمل بدراسة تأثير إضافة أيونات +3Cr إلى الوسط الفعال ) Nd: YAG ( من أجل الحصول على كفاءة ليزر أعلى. باستعمال البرامج " "ZEMAX و LASCAD'' " توصلنا إلى أن الوسط ) Cr: Nd: YAG ( يملك كفاءة ليزرية عالية قدرت ب: (16.88w) ، أكبر من كفاءة ليزر الوسط ) Nd: YAG ( التي قدرت ب: ) 9.82w ( وبنسبة % 0.72 )بالنسبةLa lumière solaire concentrée est convertie en laser en l’appliquant à un milieu actif qui détermine la puissance absorbée. Le milieu actif (Nd : YAG) est le plus répandu en raison de ses excellentes propriétés physiques et thermiques et mécanique etc... Malgré cela, le chevauchement entre son spectre d'absorption et le spectre d'émission du soleil est de 16 %, ce taux est relativement faible. Afin d'améliorer l'efficacité de conversion (lumière du soleil / lumière laser), dans ce travail, nous avons étudié l'effet du Co-dopage avec les ions Cr+3 du milieu actif (Nd : YAG) afin d'obtenir une efficacité laser plus élevée. Les programmes de simulation « ZEMAX et LASCAD », nous ont permis d’obtenir une puissance laser, pour le milieu Nd : YAG : 9.82w et pour le milieu Cr : Nd : YAG : 16.88w, cette dernière est supérieure de 1.72 fois que la première puissance (pour le système laser solaire proposé dans ce mémoire).
  • Item
    Nّd:YAGّ تحسين كّفاءة مّنظومة اّلليزر اّل شمسي بّ Cériumّ :ّ
    (university of eloued جامعة الوادي, 2023-06-06) اّل سي دة رّقي ة, اّلت جاني –ّ; اّل زهرة, رّ زاق زّوازي
    هدف تحس ين مرد ود ي ة أنظمة الليزر ال ش مس ي إلى ال ح ص ول على أكبر اس تطاعة ليزر م نبعث انطلاق ا من ال ط اقة ال ش مس ي ة ال م ركَّ زة المستعملة في تحفيز الوسط الليزري )الوسط الفع ال(، مِّ م ا ي ستوجِّ ب تحسِّ ين أداء منظو م ة تجميع وتركيز ال ط اقة ال ش مس ي ة وكذلك منظو م ة توليد أشع ة الليزر )رأس الليزر(. ت ر كَّ زت عملي ة ال تَّحسين، في هذه المذ ك رة، على تطوير أداء الوسط الفع ال Nd:YAG نظ ر ا لنسبة تطابق طيف امتصاصه مع طيف الانبعاث الشمسي ال ض عيفة نسبي ا، وذلك بال ت طعيم ال م ضاعف لهاته الماد ة بأ ي ونات السيريوم )+3Ce( . أظهرت نتائج ال م حاكاة بواسطة البرنامج ين ®Zemax و ™LASCAD ، أ ن استخدام ال ت طعيم ال م ضاعف بالسيريوم يؤد ي إلى تحسينٍ معتبرٍ في خصائ منظومة الليزر ال ش مسي Ce:Nd:YAG . ت م الح ص ول على استطاعة م مت ص ة أكبر بحوالي ال ض عف ) 1.91 م ر ة(، كفاءة تحويل شمسي-ليزري أكبر ب 1.5 م ر ة، كفاءة الم يل )الانحدار( لتحويل الاستطاعة ال ش مس ي ة ال م مت ص ة من طرف الوسط الفع ال إلى ليزر شمسي أكبر ب 1.06 م ر ة و كفاءة تجميع أكبر ب 1.5 م ر ة من المنظو م ة التقليد ي ة ل Nd:YAG تحت نفس ال ش روطL’amélioration de l’efficacité des systèmes laser solaires vise à obtenir la plus grande puissance laser émise à partir de l’énergie solaire concentrée utilisée pour stimuler le milieu laser (le milieu actif), ce qui nécessite l’amélioration des performances du système de collecte et de concentration de l’énergie solaire, ainsi que le système de génération de faisceau laser (tête laser). Dans ce mémoire, l’amélioration a porté sur le développement des performances du milieu actif Nd:YAG en raison du faible taux de chevauchement de son spectre d’absorption avec le spectre d’émission solaire, en le co-dopant avec des ions cérium (Ce+3). Les résultats de simulation à l’aide des programmes Zemax® et LASCAD™ ont montré que l’utilisation du co-dopage avec le cérium conduit à une amélioration significative des caractéristiques du système laser solaire Ce:Nd:YAG. La puissance absorbée est doublée (1.91 fois), l'efficacité de conversion solaire-laser est 1.5 fois plus, l'efficacité de pente pour la conversion de la puissance solaire absorbée (par le milieu actif) en un laser solaire est 1.06 fois plus, et l’efficacité de collecte est de 1.5 fois que celles du système conventionnel Nd:YAG sous les mêmes conditions.
  • Item
    استخدام أكسيد القصدير 2SnO الناقل الشفاف كمو جه للأشعة تحت الحمراء
    (university of eloued جامعة الوادي, 2023-06-07) دويس, دعاء; شعبانة, شيماء
    تم في إطار هذا العمل ترسيب أغشية رقيقة من أكسيد القصدير 2SnO النقية والمطعّمة بالفلور ) 0% , 3% , 6% , 7% , 8% , 9% ( والأنتموان ) 0% , 0.6% , 0.8% , 1% ( بتقنية الرش بالانحلال الكيميائي الحراري على ركائز زجاجية مسخّنة تحت درجة حرارة 480℃ لمدّة 3 دقائق. حيث اظهرت نتائج الدراسة أن لأغشية أكسيد القصدير القدرة على توليد استجابة غير خطية من الدرجة الثالثة وهذا نظرًا لخصائصها الكهربائية )ناقلية عالية( والضوئية الجيّدة إذ يكون تفاعل الأغشية مع الضوء تفاعل غير خطي في مجال الأشعة تحت الحمراء القريبة، حيث أن قرينة الانكسار تكون صفرية أو سالبة وهذا ما يبرّر التصرف البلازمي للمادة. انطلاقًا ممّا سبق نرى أنه بالإمكان استعمال أكسيد القصدير كمصدر ضوئي لتوليد التوافقيات الجديدة.In this study, we employed a chemical dissolution spraying fluorine doped with 2SnOtechnique to deposit thin films of pure (0%, 3%, 6%, 7%, 8%, 9%) and antimony (0%, 0.6%, 0.8%, 1%) on preheated glass substrates at 480℃ for 3 min. the results of our investigation revealed that tin oxide films possess the ability to exhibit a third-order nonlinear response. This behavior can be attributed to their excellent electrical conductivity and optical properties. This films exhibit a nonlinear interaction with light in the near-infrared range, where the refractive index is close to zero or even negative. This phenomenon can be attributed to the plasma-like behavior of the material. Based on the findings mentioned above, tin oxide emerges as a potential source for generating new harmonics.
  • Item
    Ca0.9Sr0.1FeO2.5دراسة البنية البلورية للمركب
    (2017-06-07) برحومة, سمية; حومدي, نزيهة
    يقدم هذا العمل دراسة حول تحديد البنية البلورية لمركب البرونمليريت Ca0.9Sr0.1FeO2.5بواسطة تقنية إنعراج الأشعة السينية على عينة من مسحوق محضر بطريقة "فرن المرآة" عند درجة حرارة .1600°Cلقد تمت معالجة مخطط الإنعراج المتحصل عليه من جهاز الإنعراج الآلي بإستعمال برنامج المحاكاة " "Rex-Powder diffractionو هذا بالإستعانة بطريقة التحسين لـ " ."Rietveldتوصلنا إلى أن المركب Ca0.9Sr0.1FeO2.5يتبلور في النظام المعيني المستقيم ( )Orthorhombiqueفي الزمرة الفضائية Pnma التي تتميز بإنتظام بنيوي, و بالإضافة إلى ذلك تم تحديد مختلف وسائط البنية البلورية للبرونمليريت ألا و هي: b= 14.4.44 Å ,a= 5.4415 Åو c=5.61.0 Åو المواقع الذرية المكونة له. إن هذه النتائج الأخيرة تم توظيفها في برنامج " "BS-1.80 betaلرسم البنية البلورية, حيث تم التحصل على شكل خلية الوحدة الإصطلاحية للمركب. لقد وجدنا أن البنية البلورية لهذا المركب تتكون من طبقات متناوبة من رباعيات الأسطح FeO4و ثمانيات الأسطح FeO6على طول المحور bمرتبطة بالرؤوس المشغولة من طرف ذرات الأوكسجين. تتوضع هذه المجسمات داخل الشبكة بطريقة تسمح بظهور قنوات شاغرة ممتدة على طول المحور ,aيمكننا من خلالها أن نتوقع إحتمالية النقل الأيوني الجيد في هذا المركبCe travail présente une étude sur la détermination de la structure cristalline du composé Brownmillerite Ca0.9Sr0.1FeO2.5 via la technique de la diffraction des rayons X sur poudre. L'échantillon a été préparé par la méthode de "Four à image" où la température de préparation atteint 1600 °C. Le diffractogramme a été traité en utilisant le logiciel "RexPowder diffraction" basé sur l'affinement "Rietveld". On a trouvé que le composé Ca0.9Sr0.1FeO2.5 se cristallise dans le groupe d'espace Orthorhombique Pnma. Le résultat final de l'affinement nous a donné les paramétres de maille: a=5.4415 Å, b= 14.8384 Å et c= 5.3160 Å. Les résultats obtenues ont été utilisés dans le programme de BS-1.80 beta afin de dessiner la structure cristalline. Le composé Ca0.9Sr0.1FeO2.5 est constitué par des couches alternées de tétraèdres FeO4 et octaèdres FeO6 tout au long de l'axe b, liés par les sommets qui sont occupés par les atomes d'oxygène. Ces polyèdres forment de canaux prolongés le long de l'axe a. Donc, on peut prévoir la probabilité de la bonne conductivité ionique dans ce composé
  • Item
    تحضير وخصائص أغشية كبريتيد الزنك ZnSالمرسبة بالحمام الكيميائي C
    (2017-05-08) شيباني, ابو بكر; بوصبيع ابراهيم, عبد الرحمان
    In this thesis, Zinc sulphide (ZnS) thin films were prepared by chemical bath deposition process. The deposition was carried out at a temperature of 80°C with different deposition times )2h, 3h and 4h(. The effect of the deposition times on the structural and optical properties of these films was investigated. The X-ray diffraction spectra of chemically deposited ZnS thin films showed the amorphous structure of the films deposited with 2h and 3h while, that deposited with 4 h showed crystallize structure. The optical properties, including the transmission spectra, absorption coefficient and band gap energy of these films were studied. It is observed that the band gap values decreases with increasing time deposition. In the case of CBD films, band gap values varied from 3.6 to 3.9 eV. It’s noticed that the optical properties were influenced by the duration of depositionحضًٍ انبحث دساست حأثيش يذة انخشسيب عهي انخواص انبُيويت وانبصشيت نغشاء كبشيخيذ انضَك ( ،)ZnSانًحضش بإسخخذاو حقُيت انخشسيب بانحًاو انكيًيائي ( )CBDفي أصيُت يخخهفت (،)4h،3h،2h وقذ حى ححضيش هزِ الاغشيت في دسجت حشاسة (° ،)80 Cحيث بيُج َخائج فحوصاث الاشعت انسيُيت ( )DRXاٌ انغشاء رو حشكيب عشوائي ( )Amorphusبانُسبت نهششائح انًشسبت في ()3h،2h ويخبهوسة بانُسبت نهششيحت انًشسبت في (. )4hوحضًُج دساست انخواص انبصشيت يٍ خلال اطياف: انُفاريت، يعايم الايخصاص، انفاصم انطاقي...،.وقذ نوحظ أٌ صيادة يذة انخشسيب أدى اني َقصاٌ قيى انفاصم انطاقي حيث حخشاوح حوني[ 3,6ـ ،]3,9 eVوكاٌ نضيادة يذة انخشسيب حأثيش عهي يخخهف انثوابج انبصشيت
  • Item
    تحدید بعض خصائص أغشیة أكسید النیكل ) (NiOالمطعم بالحدید )(F
    (2017-05) مصباحي, الطاهر; دقة, عبد الله
    This work includes the study of the structural, electrical and optical characteristics of pure nickel oxide (NiO) thin films prepared from different molar concentrations of solution of nickel nitrate (Ni(NO3)2.6H2O) and another doped with iron (Fe) with the different volume percentages (3-6-9-12-15 %) of the solution of Iron nitrate (FeN3O9.9H2O), where the deposition of thin films of nickel oxide (NiO) on glass substrates done under the temperature (500 oC) by the pyrolytic spray technique. The results of X-rays diffraction showed that the films prepared have a cubic crystal structure in a dominant direction (111), and it was noted that there is an increase in light transmission due to doping up to (85%), on the other hand, the results of tests (FTIR) showed the emergence of chemical bonds (Ni-O) and (Fe-O), which appear in the frequency range (505-443 cm-1), whereas the surface resistance showed a remarkable increase after doping, and the value of energy of band gap of pure films was about (3.69 V), but in the case of the iron-doped films the energy of band gap took the values between (3,41eV) to (3.69 V) .Ce travail s'est intéressé à l'étude des caractéristiques structurelles, électriques et optiques des couches minces d'oxyde de nickel (NiO) pur, préparé à partir de différentes concentrations molaires de solution de nitrate de nickel(Ni (NO3)2.6H2O)et d'autres dopées fer (Fe) par des pourcentages volumiques (3-6-9-12- 15%) du nitrate de fer (FeN3O9.9H2O), où le dépôt des couches minces d'oxyde de nickel (NiO) sur des substrats de verre sous la température (500 o C) par la technique de spray pyrolytique, les résultats de diffraction des rayons X ont montré que les couches minces préparées ont une structure cristalline cubique et une direction dominante (111), une augmentation de la transmission de la lumière à cause du dopage a été notée , elle a atteint 85%, d'autre part, les résultats des tests (FTIR) ont montré l'émergence des liaisons chimiques (Ni-O et Fe-O), qui apparaissaient dans la gamme de fréquences (505-443 cm-1), la résistance de surface a connu une augmentation notable après le dopage, l'énergie de gap des couches pures a atteint une valeur max de 3,69 eV, variant de 3,41eV jusqu'à 3,69 eV dans le cas des couches dopées fer
  • Item
    دراسة نواتج الانشطار النووي داخل مفاعل البحثNUR بواسطة برنامج الماتلاب MA
    (2017-05) عازب عثمان, خليل; شويرف, شعيب
    تعتمد المفاعلات النووية الحرارية في انتاج الطاقة وكذا النظائر المشعة على ظاهرة الانشطار النووي لنواتي اليورانيوم U-235والبلوتونيوم ، PU-239لكن الانشطار النووي ومختلف التفاعلات النووية التي تحدث في قلب المفاعل تؤدي الى ظهور واختفاء مستمر لعدد غير محدود من النظائر بعضها ذو أهمية كبيرة في عمل المفاعل او بسبب تأثيره على الانسان والبيئة. نهتم في هذا العمل بدراسة تطور مكونات الوقود النووي في مفاعل البحث ()NUR باستعمال برنامجي الحساب WIMSو CITVAPثم تحليل النتائج المتحصل عليها وبلورتها بواسطة برنامجي .MLes réacteurs nucléaires thermiques dépendent de la production d'énergie, ainsi que des isotopes radioactifs sur le phénomène de la fission nucléaire des noyaux de l'uranium U235 et le plutonium PU239, mais la fission nucléaire et les diverses réactions nucléaires qui se produisent dans le cœur du réacteur conduisant à l'apparition et la disparition d'un nombre continu et illimité d'isotopes, certains d'une grande importance dans le fonctionnement du réacteur, ou en raison de son impact sur l'homme et l'environnement. Ce travail est intéressé à étudier l'évolution des composantes du combustible nucléaire dans le réacteur de recherche de (NUR) en utilisant les codes WIMS et CITVAP ensuite analyser les résultats obtenus et élaborés par le programme Matlab
  • Item
    Bi2 Sr2 Ca2 Cu2 O8 دراسة أثرظروف التحضيرعلي الخواص البنيوية وفائقة الناقلية للمركب
    (2017-05-07) شيحاني, مروة; عروه, مروة
    Le travail de ce mémoire se résume à l’étude de l’effet des conditions de préparation tels que la température et la durée des traitements thermiques sur les propriétés structurales et supraconductrices du composé Bi2Sr2CaCu2O8 à partir des résultats de la DRX, les photographies du MEB ainsi des mesures de résistivité électrique pour des échantilons préparés par la méthode de la reaction à l’état solide. Les Résultats ont révélé que le changement de la température et de la durée de traitement thermique de la calcination et de frittage a un effet significatif sur la qualité, la microstructure, la valeur de la résistivité électrique ainsi sur la température critique de l’échantillon final. On a pu à la fin trouver que la calcination à 810°C pendant 15 heures suivie par un long frittage pendant 72 heures donnent un échantillon d’une qualité très acceptable, ayant une température critique de 84,75K qui est très proche de la valeur idéale de la phase Bi-2212 qui vaut 85Kيخهخص عمم ٌزي انمزكشة في دساست مذِ حأثيش ظشَف انخحضيش مه دسخت حشاسة َمذة انمعانداث انحشاسيت عهّ انخصائص انبىيُيت َفائقت انىاقهيت نهمشكب Bi2Sr2CaCu2O8اوطلاقا مه وخائح اوعشاج الأشعت انسيىيت َصُس انمدٍش الانكخشَوي انماسح بالإضافت إنّ قياساث انمقاَميت انكٍشبائيت نعيىاث حضشث بإسخعمال طشيقت انخفاعم في انحانت انصهبت. أظٍش ححهيم انىخائح أن حغييش دسخت انحشاسة َمذة انمعانداث انحشاسيت في مشحهت انكهسىت َانخهبيذ نً حأثيش مهحُظ عهّ خُدة انعيىت انىٍائيت َعهّ بىيخٍا انمدٍشيت َكزنك عهّ مقاَميخٍا انكٍشبائيت َأيضا عهّ دسخت حشاسحٍا انحشخت. َقذ حُصهىا إنّ أن انكهسىت في 810°Cخلال 15ساعت مخبُعت بخهبيذ طُيم نمذة 72ساعت يمكه مه انحصُل عهّ عيىاث انطُس Bi-2212بدُدة خذ مقبُنت بحيث بهغج دسخت انحشاسة انحشخت نٍزي انعيىاث ٌَ 84.75Kي قيمت قشيبت خذا مه دسخت انحشاسة انحشخت انمثانيت نٍزا انطُس انخي حقذس بـ .85K
  • Item
    Dosimetric characteristics of RPL GD-302 and RPL GD-450: Percentage Dose Depth and Energy response for electrons beams
    (2017-05) Nemsi, Fatma; Djedidi, Ouarda
    The purpose of current work was to study the response of two commercially available glass dosimeters known as RPL GD-302 and RPLGD-450 without filters. In this study, Monte Carlo simulation code MCNP5 was using to calculate the Percentage Depth Dose (PDD%) and energy response in water phantom for 4-20 MeV electrons beams with 60Co γ-ray as a reference beam. Monte Carlo calculations show, with 4 MeV energy beam the depth of maximum dose was 0.8 cm and 0.9 cm, and with 6 MeV the depth of maximum dose was 1.4 cm and 1.5 cm for RPL GD- 450 and RPL GD- 302 , respectively. In other part, the results energy responses are comparable with literature, where we found a maximum of 8 % and 4.3% for RPL GD- 450 and GD-302, respectively. Finally, our results confirm that the Silver-activated phosphate glass dosimeter without filter can be used as a detector for high energy electrons beams such as in radiation therapyL’objectif du notre travail était d'étudier la réponse de deux dosimètres de verre disponibles dans le marché, connus sous le nom de RPL GD-302 et RPLGD-450 sans filtres. Dans cette étude, le code de simulation Monte Carlo MCNP5 utilisait pour calculer la pourcentage de dose de profondeur (PDD%) et la réponse énergétique dans un fantôme d'eau pour les faisceaux d'électrons de 4-20 MeV avec rayons γ du 60Co comme faisceau de référence. Les calculs de Monte Carlo montrent montre, avec un faisceau d'énergie de 4 MeV, la profondeur de la dose maximale était de 0,8 cm et 0,9 cm, et avec 6 MeV, la profondeur de la dose maximale était de 1,4 cm et 1,5 cm pour RPL GD-450 et RPL GD-302, respectivement. D'autre part, les réponses énergétiques des résultats sont comparables à celles de la littérature, où nous avons trouvé un maximum de 8% et 4,3% pour RPL GD- 450 et RPL GD-302, respectivement. Enfin, nos résultats confirment que le dosimètre en verre phosphate activé par l’argent sans filtre peut être utilisé comme détecteur pour des faisceaux d'électrons à haute énergie tels que dans la radiothérapie.
  • Item
    تقدير درجة حرارة سطح أرضي بإستخدام معطيات الأقمار الصناعية
    (2017-05) العوامر, نجيبة; طواهر, شهرزاد
    ئن حقذَز درجت حزارة سطح أرضٍ ) (Tsاوطلاقا مه معطُاث الأقمار انصىاعُت فٍ انمجال انطُفٍ ما ححج الأحمز انحزارٌ َخىقف عهً الإشارة انمهخقطت عهً مسخىي هذي الأقمار انصىاعُت. نكه الإشكانُت حخمحىر فٍ كىن أن درجت حزارة انهمعان انمقاست عهً مسخىي انقمز انصىاعٍ لا حعبز عه درجت انحزارة انحقُقُت نسطح الأرض كىوها حخضع نخأثُزاث انغلاف انجىٌ، فهذنك وجب حصحُحها. حطزقىا فٍ هذا انعمم ئنً دراست عىامم الأرض و انجى انمإثزة عهً درجت حزارة انهمعان عهً مسخىي انقمز انصىاعٍ حُث وجذث أوها حخعهق بانحانت انجىَت و بمعامم اوبعاثُت انسطح و بشاوَت انزؤَا. عزضىا فٍ هذا انعمم وىعُه مه انخىارسمُاث انمقخزحت نخقذَز ،Tsخىارسمُاث مه انىىع أحادٌ انقىاة و خىارسمُاث مه انىىع انىافذة انمقسىمت. فٍ عمهىا هذا قمىا بخطبُق خىارسمٍ انىافذة انمقسىمت نخقذَز Tsاوطلاقا مه معطُاث انقمز انصىاعٍ .L’estimation de la température de surface (Ts) à partir des données satellitaires dans le domaine infrarouge thermique dépend du signal mesuré par les satellites. Mais le problème centré sur le fait que la température de brillance mesurée au niveau du satellite ne reflète pas la température réelle de la surface terrestreà cause des effets atmosphériques, donc la température de brillance doit être corrigée. Nous avons discuté dans ce travail, l’influence des paramètres de surface et d’atmosphère sur la température de brillance au niveau du satellite et nous avons trouvé que cette dernière dépend de la situation atmosphérique et de l’émissivité de surface et de l’angle de vision. Nous avons divisé les algorithmes d’estimation de Ts en deux types: algorithmes mono-canal et algorithmes dits de split-window. Dans ce travail, nous avons utilisé la technique split-window pour estimer Ts à partir des données du satellite MSG-1