Please use this identifier to cite or link to this item: http://hdl.handle.net/123456789/10699
Title: Etude expérimentale et numérique d'un système de refroidissement à base de caloducs couplés avec un matériau à changement de phase
Authors: Boukandoura, Abdelmalek
Keywords: heat pipes, phase change materials (PCM), cooling, thermal powers, physical phenomena.
أنابيب الحرارة ، مواد تغيير الطور ، التبريد ، القوى الحرارية ، الظواهر الفيزيائية
Issue Date: 2021
Publisher: Université d'El Oued
Series/Report no.: 621.04-046-01
Abstract: "Heat pipes are particularly interesting solutions for cooling. In the first chapter, a general theoretical study on heat pipes and the physical phenomena involved in their operation, types, composition and operating limits are presented. The modeling and simulation performed in this work is to study the steady state thermal performance of a capillary pumped heat pipe applied in the cooling of an electronic component. The finite volume method is used to analyze the thermal phenomena. A heat pipe system (copper/water) assisted by phase change materials (PCM) for cooling was presented as a potential solution. The parameters studied are the imposed power from 20 to 100 W, the temperature and thermal resistance of the evaporator and the steam line as well as the inclination of the evaporator compared to the condenser (0° to 90°).In this thesis, an experimental and numerical analysis will be made to study the thermal performance of a heat pipe with a phase change material for cooling. The adiabatic section of the heat pipe is covered with a storage vessel containing a phase change material (PCM) that can store and release thermal energy depending on the heating power of the evaporator and the ventilation rate of the condenser. Experimental investigations are conducted to obtain the temperature distributions of the system. The parameters of this study include the effect of inclination, different PCM filling volumes and heating powers in the cooling module. The results showed that the PCM-assisted heat pipe provided the required cooling capacity and are efficient compared to conventional heat pipes." "الأنابيب الحرارية هي حلول مثيرة للاهتمام بشكل خاص للتبريد. في الفصل الأول ، يتم تقديم دراسة نظرية عامة لأنابيب الحرارة والظواهر الفيزيائية التي تدخل في عملياتها وأنواعها وتركيبها وحدود التشغيل. النمذجة والمحاكاة التي تم إجراؤها في هذا العمل هي دراسة الأداء الحراري للحالة المستقرة لأنابيب الحرارة ذات الضخ الشعري المطبق في تبريد مكون إلكتروني. تستخدم طريقة الحجم المحدود لتحليل الظواهر الحرارية تم تقديم نظام أنابيب الحرارة (النحاس / الماء) بمساعدة مواد تغيير الطور للتبريد كحل محتمل. المعلمات التي تمت دراستها هي القوة المفروضة من 20 إلى 100 واط ، ودرجة الحرارة والمقاومة الحرارية للمبخر وخط البخار بالإضافة إلى ميل المبخر فيما يتعلق بالمكثف (0 درجة إلى 90 درجة) في هذه الأطروحة سنقوم بتحليل تجريبي وعددي لدراسة الأداء الحراري لأنبوب حراري مع مادة متغيرة الطور للتبريد. يتم تغطية القسم الأديباتي من الأنبوب الحراري بوعاء تخزين يحتوي على مادة تغيير الطور والتي يمكنها تخزين الطاقة الحرارية وإطلاقها اعتمادًا على قوة التسخين للمبخر وسرعة المروحة.المكثف ، يتم إجراء التحقيقات التجريبية للحصول على توزيعات درجة حرارة النظام ، وتجري التحقيقات التجريبية من الحصول على توزيعات درجة حرارة النظام. وتشمل المعلمات من هذه الدراسة تأثير الميل، وأحجام مختلفة من التعبئة والقوى التدفئة في وحدة التبريد. أظهرت النتائج أن أنبوب الحرارة بمساعدة يوفر سعة التبريد المطلوبة وكان فعالًا مقارنة بأنابيب الحرارة التقليدية. "
Description: Energétique مذكرة ماستر تخصص
URI: http://dspace.univ-eloued.dz/handle/123456789/10699
Appears in Collections:Department of mechanical engineering

Files in This Item:
File Description SizeFormat 
621.04-046.pdfEnergétique مذكرة ماستر تخصص4.9 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.